boostandmuscle Posted June 11, 2008 Report Share Posted June 11, 2008 I need some measurements from FIP's Hurricane MPI manifold.. Runner length, plenium length, plenium ID and OD and offset if there is any thanks!!!! Link to comment Share on other sites More sharing options...
trackone Posted July 2, 2008 Report Share Posted July 2, 2008 I see your makinbg your own mainfold let me know how it turns out....... Link to comment Share on other sites More sharing options...
boostandmuscle Posted July 3, 2008 Author Report Share Posted July 3, 2008 well nobody on here helped lol.. i ended up using 5" for the plenium, 1.5" ID 5" long for the runners, 1/2 inch thick plate for the adaptor and TB plate Link to comment Share on other sites More sharing options...
cashsaudio Posted August 8, 2008 Report Share Posted August 8, 2008 well nobody on here helped lol.. i ended up using 5" for the plenium, 1.5" ID 5" long for the runners, 1/2 inch thick plate for the adaptor and TB plate i had one it was longer than 5" i think it was about 8" with about 75degree bend. probably too late tho to answer Link to comment Share on other sites More sharing options...
Recommended Posts