Jump to content

MPI done with dyno sheet!


Recommended Posts

Hi all,

it's been a while since I have posted here. Anyhow Magna MPI is done see pic and dyno sheet below.

 

Next upgrades are fresh engine, fuel pump and re-route cooler pipework to better suit Magna setup.

It would seem it may be possible to get 300HP at the wheels not sure, the turbo would certainly flow that I'm just not sure if the stock cooler will flow that much and I don't really want to modify the car any more from original.

 

Notice my "re-heat" cooler pipe going along the top of the radiator :D

I was going to tape it up with that silver reflective insulation tape but I could not get any before the dyno run.

Anyhow a good example of where not to run a cooler pipe! But until I re-route the pipe work which will require aluminium welding a new outlet pipe on the stock cooler it will have to stay that way.

 

Anyhow all this will take a while because I have to get the JA Starion track car back on the road first.

 

http://starion.mrbdesign.com.au/images/widebody_magna.jpg

 

http://starion.mrbdesign.com.au/images/widebody_dyno_magna.jpg

Link to comment
Share on other sites

 Share

×
×
  • Create New...