freebird Posted January 21, 2006 Report Share Posted January 21, 2006 If you are completely redoing the suspension.Or just wanna know our roll center location.Whatever your performance needs this program is awsome!!!!! http://www.performancetrends.com/SuspAnzr.htm But you must be very accurate with your measurements.Even a 32nd off and you may be wrong.Keep that in mind! We used this program in college and it is truell bad a**. You can look at the front suspension and the rear.Macpherson strut or A armsindependent rear or straight axle.Going into turns for circle car set up.Or even harder to program,....Road Race :twisted: You can set up your suspension (if modifing) on the roll center screenthen dive it in the action screen to see the camber and caster changes!Truely a racers need to have software.only 80 bucks and you can have the software for front.Hell you really only need this one, if you create 2 diferentfront susp.as macpheresion strut.Because our cars have them front and rear.the other program for circle track and RR is 160 or soand you can program the whole car roll and dive if you know all the measurements of the track this can come in handy.Just a thought Id figure i would let you guys know about.Cause even if your drag racing and you dont know what your suspension is doing then you can be hurting your time. Link to comment Share on other sites More sharing options...
starioso-tsi Posted January 24, 2006 Report Share Posted January 24, 2006 omfg that program is SWEET! my dreams are completed!!! Link to comment Share on other sites More sharing options...
Recommended Posts