supturbo Posted April 18, 2003 Report Share Posted April 18, 2003 OK I need some help on HOW MANY and LOCATION of VAC.. LINES(PORTS)..I just want to make sure I have everything covered before I start the drill up- This is what I have so far-- I will be running MS with stock dis.-99 mustang 4.6 tb 1. vac port on the fourth runner for brake booster 2. vac port in the plenem for the boost gauge 3. port in the tube just before the tb for air sensor 4. vac port in the plenem for the vac advance 5. vac port in the plenem for the map sensor 6. vac port in the plenem for the bcfpr 7. vac port in the plenem for the boost controller 8. vac port for the bov.. MAN THIS LIST IS LONG!!AFTER GOING THRU IT ALL-CAN I TIE SOME OF THESE TOGETHER?? Link to comment Share on other sites More sharing options...
Eldos1 Posted April 19, 2003 Report Share Posted April 19, 2003 Don't forget that there is a vaccum line set that runs the air doors in the dash for heater, dash, defrost. Steve Gee Link to comment Share on other sites More sharing options...
Recommended Posts