Starheel Posted July 22, 2014 Report Share Posted July 22, 2014 So i took my throttle body off to change upgrade my head. Realized that was going to take longer than i thought on my work schedule, but decided while it was off to get an upgraded throttle body from BrianPaul. I also got a upgraded TPS. anyway I put the throttle body back on but the last bolt to go into the intake for the throttle body to intake connection stripped. does anyone know this size so i can go in there and re-tap it? I want to get this thing back running so i can go get my exhaust put on and my 16g turbo Quote Link to comment Share on other sites More sharing options...
markhansenconquest Posted July 22, 2014 Report Share Posted July 22, 2014 get a good used one on here..theres lots of those lying around......IMO be sure to clean threads and bolts... Quote Link to comment Share on other sites More sharing options...
Starheel Posted July 23, 2014 Author Report Share Posted July 23, 2014 A new intake manifold? I have one, but was trying to avoid having to take off the manifold as it is a complain to get to all the bolts. Quote Link to comment Share on other sites More sharing options...
T-Harps Posted July 23, 2014 Report Share Posted July 23, 2014 Take one of your bolts to the hardware store and find out which metric nut screws on Quote Link to comment Share on other sites More sharing options...
markhansenconquest Posted July 23, 2014 Report Share Posted July 23, 2014 (edited) put 1/4 dia long bolt with nut and washers ....will fit with out drilling out threads...change out when u blow head gasket.....nut goes on bottom of T/B... Edited July 23, 2014 by markhansenconquest Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.