Paper Bag Posted January 7, 2014 Report Share Posted January 7, 2014 Trying to fill that big gaping hole where the stereo/whatever goes there stock used to be. Planning on installing a stereo this weekend, just need the outer trim piece and maybe an install kit if anybody has one. Quote Link to comment Share on other sites More sharing options...
quequest Posted January 7, 2014 Report Share Posted January 7, 2014 I had the same dilemma. I went to Walmart and bought an installation kit for a 1995 Maxima. After installing the radio in the Max I encountered the same problem with the stock radio being larger than the aftermarket radio, so I installed tray/ cubby hole to hold small items. I did the same with the Conquest. I mounted the stereo at the top of the area for the radio and installed a tray/cubby hole in the bottom area Quote Link to comment Share on other sites More sharing options...
dsm9478 Posted January 7, 2014 Report Share Posted January 7, 2014 I bought an install kit through best buy not too long ago they should still carry them Quote Link to comment Share on other sites More sharing options...
Wildcatfanatic Posted January 13, 2014 Report Share Posted January 13, 2014 (edited) If you have some skills with your hands you could get a piece of abs plastic and customize it to fit. Edited January 13, 2014 by Wildcatfanatic Quote Link to comment Share on other sites More sharing options...
MotoCam360 Posted January 14, 2014 Report Share Posted January 14, 2014 (edited) This: http://i1210.photobucket.com/albums/cc409/motocam360/SQ%20Radio%20Bezel/SQ3gaugeradioplate_zps4d1baa5b.jpg http://i1210.photobucket.com/albums/cc409/motocam360/SQ%20Radio%20Bezel/SQalradiopanel3gauge_zps169fd5fa.jpg http://i1210.photobucket.com/albums/cc409/motocam360/SQ%20Radio%20Bezel/SQalradiopanel3gaugeside_zps3ac7aea8.jpg http://i1210.photobucket.com/albums/cc409/motocam360/SQ%20Radio%20Bezel/SQradiopanelHVAC_zpsab72be5d.jpg http://i1210.photobucket.com/albums/cc409/motocam360/SQ%20Radio%20Bezel/RadioBezelwithpocket2.jpg http://i1210.photobucket.com/albums/cc409/motocam360/SQ%20Radio%20Bezel/RadioBezelwithpocket.jpg http://i1210.photobucket.com/albums/cc409/motocam360/SQ%20Radio%20Bezel/SQSmokedRadioBezelhvac.jpg Edited January 14, 2014 by MotoCam360 Quote Link to comment Share on other sites More sharing options...
Wildcatfanatic Posted January 14, 2014 Report Share Posted January 14, 2014 Exactly. ^just like that. I took some 1/8 inch abs and using a dremel cut it up. Quote Link to comment Share on other sites More sharing options...
importwarrior Posted January 14, 2014 Report Share Posted January 14, 2014 (edited) how much for one like this? i like where the gauge holes are positioned.no switches or LED's. i can add them when i want. Thanks, http://i35.photobucket.com/albums/d182/Professor-Quest123/cooling/CG-1.jpg Edited January 14, 2014 by importwarrior Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.