19red88quest Posted July 8, 2012 Report Share Posted July 8, 2012 i know ill get jumped on about doing searches , i did search and couldnt find this specific answer im looking for. the modded maf translator plug has 5 prongs to plug into the stock harness, 3 on top and 2 on bottom. the stock harness has 8 slots the prongs can slid into 4 on top 4 on bottom. how do i correcly plug this in? thanks Link to comment Share on other sites More sharing options...
D_Venable Posted July 9, 2012 Report Share Posted July 9, 2012 our stock should only have 6 pin/slots, unless a previous owner has soldered on a 1G dsm plug, which in that case it should plug right in. In the case you are mistaken, and do have the 6 pin stock plug, easiest way is to trim the plug on the translator... These pics should be rather self-explanatory... http://www.26liter.us/gallery/albums/userpics/10030/PB100144.jpg http://www.26liter.us/gallery/albums/userpics/10030/PB100145.jpg http://www.26liter.us/gallery/albums/userpics/10030/PB100143.jpg -Derek Link to comment Share on other sites More sharing options...
19red88quest Posted July 9, 2012 Author Report Share Posted July 9, 2012 yep that works., thanks alot. Link to comment Share on other sites More sharing options...
averse Posted July 9, 2012 Report Share Posted July 9, 2012 i know ill get jumped on about doing searches , i did search and couldnt find this specific answer im looking for. the modded maf translator plug has 5 prongs to plug into the stock harness, 3 on top and 2 on bottom. the stock harness has 8 slots the prongs can slid into 4 on top 4 on bottom. how do i correcly plug this in? thanks Most people here realize the search function on this board is of questionable use... Link to comment Share on other sites More sharing options...
Recommended Posts