nomofwd Posted June 30, 2012 Report Share Posted June 30, 2012 After my engine bay began to sound like a drumline was practicing in there last night on my already .020 under crank I am in need of a replacement. I would really love to get a piece that doesn't already need grinding or was removed as a result of oiling issues. Quote Link to comment Share on other sites More sharing options...
Killtodie Posted July 1, 2012 Report Share Posted July 1, 2012 I got one that is .050 and another one that has some inclusions but was running on stock bearings, might need a polish or a .020 Quote Link to comment Share on other sites More sharing options...
nomofwd Posted July 1, 2012 Author Report Share Posted July 1, 2012 If you want pm me more detail about the second crank you have and a price. Quote Link to comment Share on other sites More sharing options...
Killtodie Posted July 2, 2012 Report Share Posted July 2, 2012 k, my friend has it in hand right now, I will pick it up from him and take pics. Quote Link to comment Share on other sites More sharing options...
quikconq Posted July 2, 2012 Report Share Posted July 2, 2012 I have one that I took to the machine shop,,,it's currently stdthey say it should clean up at 10/10 rods and mains. I had them do one crank,,,sold it already,,,,,I have one last one250 plus shipping,,that's fresh from the shop 10/10 Quote Link to comment Share on other sites More sharing options...
nomofwd Posted July 2, 2012 Author Report Share Posted July 2, 2012 Currently working on a deal right now but if not I will let you both know. Quote Link to comment Share on other sites More sharing options...
nomofwd Posted July 12, 2012 Author Report Share Posted July 12, 2012 Waiting to find out about one crank that may be good to go, but I am starting to run out of tiem to get my car back on the road. Again if anyone has a standard crank from an engine that did not have bearing related issues I am in need. At this point by the time I get anything and then have to machine it I will have spent too much time. Quote Link to comment Share on other sites More sharing options...
quikconq Posted July 13, 2012 Report Share Posted July 13, 2012 Snooze you lose Quote Link to comment Share on other sites More sharing options...
nomofwd Posted July 13, 2012 Author Report Share Posted July 13, 2012 Very true and I apologize for not switching directions and going to you and it's nothing against you personally but I have small issue getting a crank that is already machined by someone that I had no dealing with for close to what I paid for my current crank to be checked and machined. That's really why I had my heart softly set on an original functioning part, and if it turned out that I needed to machine it I would be in the same boat. Quote Link to comment Share on other sites More sharing options...
quikconq Posted July 13, 2012 Report Share Posted July 13, 2012 Well if you change your mind,,,its on the shelf. My machine shop has a fairly fast turn around time,about a week. Quote Link to comment Share on other sites More sharing options...
Shiltron Posted July 13, 2012 Report Share Posted July 13, 2012 I have two in Gainesville. PM sent. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.