jayfressh Posted May 21, 2012 Report Share Posted May 21, 2012 Looking for the engine mount nut size, I tried a few different metric sizes 10x1.50, 10x1.25 etc... Possibly the stud top is just a bit banged up from swapping motors. Hoping I just have the wrong size, if not there will be 2 cross threaded studs after I jam these 1.50s on, and I'll just replace the whole mount next time around. Link to comment Share on other sites More sharing options...
zactek Posted May 21, 2012 Report Share Posted May 21, 2012 Looking for the engine mount nut size, I tried a few different metric sizes 10x1.50, 10x1.25 etc... Possibly the stud top is just a bit banged up from swapping motors. Hoping I just have the wrong size, if not there will be 2 cross threaded studs after I jam these 1.50s on, and I'll just replace the whole mount next time around. Most M10 nuts and bolts on the Starions are 1.25 thread pitch, fine thread, including the mount nuts. Zack K. Link to comment Share on other sites More sharing options...
Recommended Posts