BuGG Posted April 8, 2011 Report Share Posted April 8, 2011 I need a coolant hose for the turbo. The rubber hose that goes from the water pump to the passenger side of the turbo. I think its 3/8. I bought a Russell hose section of -6an and its too small even though -6an is supposed to be 3/8 ID. Local parts stores dont have 3/8 heater hose. Where can I get this? Thanks BuGG Quote Link to comment Share on other sites More sharing options...
Blue Posted April 8, 2011 Report Share Posted April 8, 2011 (edited) Dads Edited April 8, 2011 by 87Blue Quote Link to comment Share on other sites More sharing options...
BuGG Posted April 8, 2011 Author Report Share Posted April 8, 2011 Excellent thanks. Quote Link to comment Share on other sites More sharing options...
BuGG Posted April 8, 2011 Author Report Share Posted April 8, 2011 Just looked and that hose is not the one i need. This is why I put it in the BS forum cuz im not sure the size of the hose. I know some people convert it to AN hose so thats what i need to know. I know someone has done this. Its the hose from the water pump to the left side of turbo not the hose on the thermostat housing. BuGG Quote Link to comment Share on other sites More sharing options...
jolyrgr Posted April 9, 2011 Report Share Posted April 9, 2011 I believe they are a -8 line. AN sizing is based on an OD size of a rigid metal tube, so the ID can vary depending on the wall thickness. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.