dem0ntsi Posted July 13, 2010 Report Share Posted July 13, 2010 Just for those who are wondering, the specs are as follows18x10.5 -30 rear 255/35/18 18x9.5 -10 front 225/35/18 Link to comment Share on other sites More sharing options...
Jehu Posted July 13, 2010 Report Share Posted July 13, 2010 Very nice... Link to comment Share on other sites More sharing options...
michael knight Posted July 14, 2010 Report Share Posted July 14, 2010 Its the single spring, we didnt cut the perches because Ive seen threads where people dont cut them and get really low with these.. I wonder why mine is so high in the back.Check the spring length. My guess is they are 7inch front and 8inch rear. Just grab the diameter,rates, and length off your current rear springs and call Eibach to order another set but 2 inches shorter. Cut the perches and call it a wrap. Link to comment Share on other sites More sharing options...
dem0ntsi Posted July 14, 2010 Report Share Posted July 14, 2010 Check the spring length. My guess is they are 7inch front and 8inch rear. Just grab the diameter,rates, and length off your current rear springs and call Eibach to order another set but 2 inches shorter. Cut the perches and call it a wrap. Thats WAY too much work.. I was getting tired watching Nick do all that work lol.. Ill just wait on the D2 coilovers and be done with it. When I get them this suspension set up will probably go up for sale. Link to comment Share on other sites More sharing options...
smallblock12 Posted July 14, 2010 Report Share Posted July 14, 2010 Dude its really easy. I used a pipe cutter from harbor freight a paint stick to measure and borrowed a electric welder. Send me the struts and ill do it haha Link to comment Share on other sites More sharing options...
Recommended Posts