smallblock12 Posted June 11, 2010 Report Share Posted June 11, 2010 Mybturbo oil feed line won't screw into the oil filter housing the one fitting goes in both but the other won't go in either. Are they supposed to be the same??? :/ Link to comment Share on other sites More sharing options...
smallblock12 Posted June 12, 2010 Author Report Share Posted June 12, 2010 Oanyne know what size fittings are needed for the turbo oil feed Link to comment Share on other sites More sharing options...
jolyrgr Posted June 12, 2010 Report Share Posted June 12, 2010 They are not the same fitting for the chra and the oil manifold. The stock turbo fitting is 12mm-1.25 and the oil manifold is a BSPT fitting. I have both if you need them. JR Link to comment Share on other sites More sharing options...
smallblock12 Posted June 12, 2010 Author Report Share Posted June 12, 2010 I need them like asap if that's cool with you. I can't diagnose why my car won't start cause I can't crank it over without oil squirting my address is 1127 rolling hills dr. Cincinnati, ohio 45255 Link to comment Share on other sites More sharing options...
Recommended Posts