Jump to content

What Parts Shold I use


Recommended Posts

Okay guys after doing some reading im still un conclusive as far as what to do with my quests suspension.... so i guess i can ask the question this way what exhaust set up (front and back) could i go with for say 600 or less?

 

What springs/struts etc. have people used?

 

A little fabrication isnt a big deal for me...

 

Im going for tighter turns as well as lower... Adjust-ability would be nice....

 

Please Help

 

Thanks

Link to comment
Share on other sites

For springs you can go with Eibachs that offer about a 1-1.5" drop, you can find these on eBay right now. ST also made springs with a much more aggressive drop (2" I believe), you'd most likely have to find them used.

 

You can also go with a coil over sleeve if you want. Cosmo offers a set which is on eBay all the time. Ground control has a set also, but its rather expensive @ like $400, compared to the Cosmo set at just over half that (~$235).

 

Also keep in mind that with most drops lower than the Eibachs your going to want to employ camber plates to keep your alignment in check, as well as tire wear. 101Propose offers front and rear camber plates that you can find on his eBay store.

Link to comment
Share on other sites

 Share

×
×
  • Create New...