JamesR Posted April 18, 2007 Report Share Posted April 18, 2007 I'm going to start my swap this weekend and wanted to know what some of you have done with the old wire harness. I've got a 1990 2.4L efi and the main ecu wire harness on the pass side merges with the drv side harness. I believe the carburated cars did not have this harness. Did you just take apart the harness to seperate them and how hard was it? The conquest harness should be easy to install being the ecu harness was basically seperate from the chassis harness except for 1 plug that attached to the dash harness. Unfortunately it looks like the D50 harness was not designed the same way. Link to comment Share on other sites More sharing options...
MainstreaM Posted April 19, 2007 Report Share Posted April 19, 2007 www.mightyd50.com They might be able to answer your question a little better. BTW what ya gonna do with the intake manifold from your truck. Kane Link to comment Share on other sites More sharing options...
JamesR Posted April 19, 2007 Author Report Share Posted April 19, 2007 www.mightyd50.com They might be able to answer your question a little better. BTW what ya gonna do with the intake manifold from your truck. Kane I already posted on the other board. Thanks. Link to comment Share on other sites More sharing options...
Recommended Posts