I am running the TBI injectors, I can't tell if they are the secondary or the primary. Do you guys have a way of finding out by part number? These are the list of the injectos I have with part number and where I got them from. Injectors have been flow tested so all the flow rates are accurate. MIRAGE: L85-2 L25-3 65.5 POUND PER HOUR 688CC@3BAR TREDIA: B59-2 B59-2 3BAR=76ML 40PSI=72ML 57.9 POUND PER HOUR 608CC@40PSI 87 STARION: J57-3 J57-3 3BAR=122ML 40PSI=116ML 85.3 POUND PER HOUR 896CC@40PSI 85 Mirage B55-3 40PSI=70ML 43 POUND PER HOUR 452CC@40PSI I need to post another log. I had the TPS threshold set at 30V, so that is why no accel enrich is kickin in. Like you said about puddles of fuel, that is what I was thinking of. I think if i set the overrun to cut fuel below 90kpa, tps at 0% and above 2000 rpm that might help.