cudabnu

Time to clean the garage, I have 2 ECI checkers, the do not have the extra harness for the late cars. $250 ea. email me if interested dave (at) karmannghia (dot) com

today is the last day, $3500 start, no reserve My link 88 Mitsubishi Starion modded1988 Mitsubishi Starion, White with Tan interior. many mods, currently in non-op status (runs and drives fine), will not pass smog visually Was converted to MPI, then went back to stock style intake so stock air cleaner, vapor canister and vaccum lines need to be re-installed, I have all the parts, but car runs fine with it currently. Stereo stopped getting power, may be a ground problem inside the kenwood, MANY spare stock and performance parts. Needs someone to take care of her and finish the small stuff. I have too many other project cars, so the car and all the extra parts need to go! (side graphics are vinyl stickers, so they can be removed) This is a mostly complete project with alot of spare parts. Sold as is where is. Buyer responsible for car transportation and spare parts shipping. 30 over block Ross racing pistons Unorthodox racing underdrive pulley GM Alt conversion Carrillo H beam rods Ported Marnal head w/ 83 valves, mechanical rockers *DM hardpipes 20G hybrid Turbo 3" *DM exhaust w/ flowmaster ABS elimination kit Joe P electric manual boost controler ACT clutch Fidenza Alum. flywheel Turbo Timer rear above window spoiler rear strut brace Custom blue glow needles on white gauge faces SHP Rims I'm sure I'm missing a bunch of stuff, but the car just sits at my work and gets started every now and then and driven around the block Spare parts a plenty: Orig block pistons and rods (orig crank spun a bearing) extra intake and injectors extra turbo and parts GM MAF Maf translator Screeming Banshee Roller cam and roller rockers interior parts 1Nos rear tailight Weld ProStar rear rims with slicks Too much to list. Orig Key was lost, but I have another complete lock set, I just changed the ignition to drive the car around Currently stored at Airhead Parts 1604 Morse Ave Ventura, CA 93003

1988 Mitsubishi Starion, White with Tan interior. many mods, currently in non-op status, will not pass smog visually, MANY spare stock and performance parts. Needs someone to take care of her and finish the small stuff. I have too many other project cars, so the car and all the parts need to go. Will NOT seperate, take it all for $5500 ( I have more than that into the engine alone)email if serious for pics. cudabnu (at) yahoo (dot) com I've been a longtime member and alot of oldtimers know me, *DM even took the car for a spin years ago after the motor was built. Currently the car sits in my garage, and get driven around the block (sideways) once a week. 30 over block Ross racing pistons Unorthodox racing underdrive pulley GM Alt conversion Carrillo H beam rods Ported Marnal head w/ 83 valves, mechanical rockers *DM hardpipes 20G hybrid Turbo 3" *DM exhaust w/ flowmaster ABS elimination kit Joe P electric manual boost controler ACT clutch Fidenza Alum. flywheel Turbo Timer rear above window spoiler rear strut brace Custom blue glow needles on white gauge faces SHP Rims I'm sure I'm missing a bunch of stuff, but the car just sits in my garage and gets started every now and then and driven around the block Spare parts a plenty: Orig block pistons and rods (orig crank spun a bearing) extra intake and injectors extra turbo and parts GM MAF Maf translator Screeming Banshee Roller cam and roller rockers interior parts Nos rear tailight Weld ProStar rear rims with slicks Too much to list. Orig Key was lost, but I have another complete lock set, I just changed the ignition to drive the car around Car is in Moorpark CA 93021 and your welcome to come check it and all the extra parts out.

Payment sent, just send to the paypal address.

I'm just headding out the door to VW show this weekend for work, But I'll take it, I can paypal you monday when I get back. I gave my last one I had to my brother, but miss it!

Looking for a roller cam, gave my creaming banshee to my brother, Since I have 83 valves, I currently have to run mechanical rockers, and just don't want to deal with adjusting them. Looking for something that will go good with my mods: Ross pistons Carrillo H beam rods P&P Marnal head w/83 valves 20G turbo *DM full hardpipes *DM 3" exhaust My car currently just sits in the garage and I take it out each weekend for a drive around the block. It is not currently smog friendly! so it may be up for sale soon for someone else to enjoy.

Time to start working on my car again now that my 2 other projects are almost done. I sent my brother my roller cam set-up since I wasn't using it, so I'm looking to replace it now. Motor is built to handle anything, but looking for somthing I can pass the smog natzi's with, and still spool up the 20G with. Suggestions are welcome, or e-mail me with what you have, or where to buy since I've been out of the loop for awhile now!!

will trade for a nice STOCK 88/89 starquest

due to deabeat ebayers, the MPI set-up is back up for sale, it's just sitting in my office taking up space! ebay mpi

it's on e-bay right now

going on ebay today

Willing to trade for a nice auto 88/89 Starquest to add to the stable.

You could always buy the whole setup and sell what you don't need :hmm3grin2orange:

Bump, lets get this thing sold, I need to buy a EFI hideaway turbo set-up for my 71 VW Bug Vert!

bump