4CFEDFDS Posted November 27, 2008 Report Share Posted November 27, 2008 (edited) I have a 87 quest up for sale. I bought the car with a blown engine and swaped a junk yard engine that was known good and i tore it down and had the crank re surfaced and new bearings and all new gaskets. I just cannot get it to run right. It has good compression on all cylinders and has good oil pressure but want to run on 2 cylinders. I really dont have the time to mess with it. The body is ok shape needs paint and has a few rust spots(none on the frame common on quest). The engine has the balance shafts removed, new timing chain and gears, hks blow off, new plugs, wires, cap and rotor, and a new clutch kit. The front bumper is off since the previous owner ran into a ditch and bent the bumper support so it will a new support but i have the bumper cover. The trans feels good(i did drive it with the blown engine in all the gears) and the rear did not clunk. The interior is black and in good shape and mostly complete. Any other questions just PM me. It has a tittle and is in my name. Sorry about all of the the leaves i live on a street named oak tree lane and guess how it got its name... yeah oak trees and they make a mess. If you look at all my previous post most of them were about trying to get this thing to run and i just dont have the time or money to put into it. I have 2 other Rx7's i need money for so i am firm on the price. Thanks for looking. http://i155.photobucket.com/albums/s297/turbo10th/th_IMG_1565.jpg http://i155.photobucket.com/albums/s297/turbo10th/th_IMG_1566.jpg http://i155.photobucket.com/albums/s297/turbo10th/th_IMG_1567.jpg http://i155.photobucket.com/albums/s297/turbo10th/th_IMG_1568.jpg http://i155.photobucket.com/albums/s297/turbo10th/th_IMG_1569.jpg http://i155.photobucket.com/albums/s297/turbo10th/th_IMG_1570.jpg http://i155.photobucket.com/albums/s297/turbo10th/th_IMG_1571.jpg http://i155.photobucket.com/albums/s297/turbo10th/th_IMG_1572.jpg http://i155.photobucket.com/albums/s297/turbo10th/th_IMG_1573.jpg http://i155.photobucket.com/albums/s297/turbo10th/th_IMG_1574.jpg http://i155.photobucket.com/albums/s297/turbo10th/th_IMG_1575.jpg http://i155.photobucket.com/albums/s297/turbo10th/th_IMG_1576.jpg Edited November 27, 2008 by 4CFEDFDS Quote Link to comment Share on other sites More sharing options...
strang3majik Posted November 27, 2008 Report Share Posted November 27, 2008 i looked at that car before...and almost bought it...lol good luck with the sale! Quote Link to comment Share on other sites More sharing options...
4CFEDFDS Posted November 27, 2008 Author Report Share Posted November 27, 2008 (edited) i looked at that car before...and almost bought it...lol good luck with the sale! Thanks Yea i fixed what that hack messed up for the most part. It had no oil pressure for who knows how long so i just built the junkyard engine since that was known good. I have the old block but its been sitting out side(it wasnt in too good of shape) now has rust in the cylinders but good if you want to strip it and have it bored over. Edited November 27, 2008 by 4CFEDFDS Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.