ESi_R_Man Posted July 21, 2007 Report Share Posted July 21, 2007 http://www.a1motors.biz/shared/viewer.aspx...37&src=eBay i can get a sweet deal on these rims, what will it take to put them on the quest?? there staggared already Link to comment Share on other sites More sharing options...
JustPaus_88TSi Posted July 21, 2007 Report Share Posted July 21, 2007 Tell me the widths, offsets and your suspension setup(or how low you wish to go in the future), and i'll tell ya exactly what you need. :wink: I can find the width's and offsets on my own after I get off work, in about two hours. :wink: Link to comment Share on other sites More sharing options...
ESi_R_Man Posted July 22, 2007 Author Report Share Posted July 22, 2007 Stock Suspension as of now, Not sure on the width's and offsets.. i know there forged wheels made by RAY's ,and there 19" i get the whole set with the tires on em for 450... i know there wider in the rear than the front Thanks LMK Link to comment Share on other sites More sharing options...
Blind_Drifter Posted July 23, 2007 Report Share Posted July 23, 2007 $450? You sure thats not just one..... Link to comment Share on other sites More sharing options...
JustPaus_88TSi Posted July 23, 2007 Report Share Posted July 23, 2007 They're 19x8(+30mm) fronts and 19x8.5(+33mm) rears.. I'd be looking for 12 to 15mm thick spacers for the fronts and 37 to 40mm thick spacer for the rears.. I've seen those rims sell for anywhere from $1200-2000 for the set. Definately a good purchase even if you don't end up using them for the SQ, you could unload them for a very nice profit on some 350z/g35 forums.. If I were to run the rims on a SQ, i'd get the rear spacers made from Fred Goeske(www.wheeladapter.com) and get them hub and rim bore centric. They'll be right around $200 shipped or so for bolt on units. The fronts won't be able to be made in a bolt on fashion due to them not being thick enough(they have to be at least 25mm), but i'd also get them hub and bore centric. The fronts should run around $70-80 shipped. The fronts will be tricky though, since you'll need to get longer wheel studs. I don't know the specifics off hand on those, but I know Artinist posted the info about where to get them. I think they may have been ARP units from Summit. Another thing to think about is the mounting surface of the rim, where it physically touches the hub. For most bolt on spacers, the rim needs to have a recess so that the lugnut that holds the spacer to the hub doesn't interfere with the mounting. And another thing to think about. Is if the G35 rims center bore is larger than the SQ's 67.1mm hubs.. If the center bore on the G35 rim is smaller than 67.1mm, you'll never get them to mount. Unless you machine off material from the SQ hub, or get the G35 rims machined for a larger bore diameter. Link to comment Share on other sites More sharing options...
Blind_Drifter Posted July 23, 2007 Report Share Posted July 23, 2007 ^^ the new rim doctor Link to comment Share on other sites More sharing options...
ESi_R_Man Posted July 23, 2007 Author Report Share Posted July 23, 2007 yes im sure its 450 for the set, ill sell them for just that, plus shipping and as a bonus to all of you guys, i get 75% off fed ex shipping price im in 33496 Boca Raton FL, im selling my car so no real need to buy these now... they sell for 950 per rim outta the dealership lmao, but tires for 19"s are expesive, i have a set of Ehh tires for em already. but im getting these so cheap because it was cheaper for this guy to buy 20"s and tires than tires for the 19"s i work for a tire store, so i get a discount, but id rather pass the deal on to someone."" Link to comment Share on other sites More sharing options...
Blind_Drifter Posted July 23, 2007 Report Share Posted July 23, 2007 So I could buy these off of you? Link to comment Share on other sites More sharing options...
Blind_Drifter Posted July 23, 2007 Report Share Posted July 23, 2007 I PMd you ESI_R_MAN. Link to comment Share on other sites More sharing options...
Starionboy84 Posted September 24, 2007 Report Share Posted September 24, 2007 Do you have pics of these rims??I must say, this sounds interesting... Link to comment Share on other sites More sharing options...
Recommended Posts