Adi Posted January 15, 2003 Report Share Posted January 15, 2003 I finally finished my switch panel...Came out looking real nice...it was my first and needs to be done again...Which I still have the materials...So I may make it a bit nicer and find a better way to bolt it in other than super glue...But here is what it looks like. Â I made a true wire harness for it was well to run under teh comsole peice that houses the seatbelt release and power mirror switch...funny thing is I made the harness too long so I have lotsa lotsa extra wire to play with..lol.. I also fixed my pod... http://www.dandjproductions.com/questpictures/switchpanel.jpg http://www.dandjproductions.com/questpictures/pillar.jpg Link to comment Share on other sites More sharing options...
maxwelhse Posted January 17, 2003 Report Share Posted January 17, 2003 What do the switches operate? Link to comment Share on other sites More sharing options...
Adi Posted January 18, 2003 Author Report Share Posted January 18, 2003 The top three are lighted. The bottom four are just little ones. top #1 fuel pump, #2 EMPTY #3 AMP(sub) bottom = #1-3 EMPTY #4 back up lights. This gives me alot of space. The fuel pump I don't know how to run back stock. When I got the car it was allready wired in because of the fuel up change. The fuel pump was previously upgraded to a higher flow mitsu pump before I got the car. the back up lights are just fkd...I can't tell what's wrong with them...I almost think it's in teh tranny though. Link to comment Share on other sites More sharing options...
Recommended Posts