chubacca_tsi Posted June 30, 2003 Report Share Posted June 30, 2003 i didnt use a oven i heated some water till it boiled pretty good and poured tha water into tha housing and it worked like a dream. Link to comment Share on other sites More sharing options...
Morphing89TSI Posted June 30, 2003 Report Share Posted June 30, 2003 chubbaca, please elaborate. Onto the film? Prying or no prying required. Yes, a complete newbie that doesn't want to screw up my first purchase ... lol. Morphing89TSI Link to comment Share on other sites More sharing options...
chubacca_tsi Posted June 30, 2003 Report Share Posted June 30, 2003 ok I boiled some water and poured it into tha tail lights. let it sit for like 10-15 mins and very carefully start prying at tha light but very carefully it tok lots of patience. i used my moms butter knives ;D to pry it. takes a lot of patience tho. Link to comment Share on other sites More sharing options...
jr_ss Posted June 30, 2003 Report Share Posted June 30, 2003 I've cleared mine out, well an old pair that were on the car wheni bought it. But the only problem with mine were that metal that protects the plastic housing was rusting. Well i took a snader and sanded all the remaining rust off and laid down 2-3 coats of chrome spray paint. Man do those suckers reflect some light now. I'll try and get a pic up... Link to comment Share on other sites More sharing options...
Recommended Posts