viper1355 Posted February 13, 2014 Report Share Posted February 13, 2014 (edited) So, I dropped the tank to do a Walbro install tonight, got it down and realized that all the phillips head bolts/screws that hold the pickup on are rusty as heck. I'd like to replace them, and It'll be easier if I can pick them up at work tomorrow and have them ready to go. It looks like it should be a 4x10mm according to the parts locator... I'm assuming that's a a 4mm x 10mm. Can anyone that's replaced them chime in and tell me what they used? Edited February 13, 2014 by viper1355 Link to comment Share on other sites More sharing options...
D3UC3S Posted February 13, 2014 Report Share Posted February 13, 2014 When I replaced mine the threads in the tank were all rusty too so I just put a slightly over sized sheet metal screw in it. Wish I could give you a size but that's how I fixed mine. Link to comment Share on other sites More sharing options...
Recommended Posts