KKruger Posted July 6, 2012 Report Share Posted July 6, 2012 Hi, I bought a hard pipe to replace the OVCP from a member on this board. There is no nipple on it for the wastegate. Why would this be? Can I tap into a different line? Thanks! Link to comment Share on other sites More sharing options...
slydogg Posted July 6, 2012 Report Share Posted July 6, 2012 just add one, you don't have to weld it on. Link to comment Share on other sites More sharing options...
SOTTY Posted July 6, 2012 Report Share Posted July 6, 2012 Home depot plumbing dept Link to comment Share on other sites More sharing options...
Frenchi934 Posted July 6, 2012 Report Share Posted July 6, 2012 I think there is another vacuum port on the injector mixer housing before the TB. you just need it to be in the intake system near the TB but before it. Link to comment Share on other sites More sharing options...
The Rabbit1 Posted July 6, 2012 Report Share Posted July 6, 2012 or depending on turbo there might be one on compressor housing. anywhere before the throttle plate is good. Link to comment Share on other sites More sharing options...
Recommended Posts