walt Posted December 5, 2009 Report Share Posted December 5, 2009 a friend of mine has an eighty seven conquest tsi and when he gives it too much peddle it dies what is the cause of this and how do i fix it Link to comment Share on other sites More sharing options...
Dred_85.5_TSI Posted December 5, 2009 Report Share Posted December 5, 2009 sounds like a bad secondary injector, green top I think, or the injector clips are switched so the smaller primary is trying to do the job of the larger secondary. Link to comment Share on other sites More sharing options...
walt Posted December 7, 2009 Author Report Share Posted December 7, 2009 sounds like a bad secondary injector, green top I think, or the injector clips are switched so the smaller primary is trying to do the job of the larger secondary. is that 100 hundred percent the problem and if so how much for the part and the guy said it just started doing it and how difficult is it to fix Link to comment Share on other sites More sharing options...
Polcat87 Posted December 7, 2009 Report Share Posted December 7, 2009 I know changing the clips can solve a lot of problems with these injection systems, but not all. If it was running ok before, then all the sudden the problem came up, than I would lean more toward dirty/faulty injectors. Clips are cheap enough to replace, but you will have to solder them in...to do it right anyway. There are some pretty good articles regarding this very topic if you "search" for them in here. I found out a lot of great info. Link to comment Share on other sites More sharing options...
Recommended Posts