I recently replaced my clutch and flywheel, and in the process realized the slave cylinder seal was shot so replaced that as well. Bolted up the transmission, filled it with fluid, installed the shufter, bled the clutch, and then noticed a problem. The shifter has movement as if in neutral, but I cannot shift it into anny gear. Also, the transmission appears to be in gear as I cannot turn the flywheel freely. So basically the transmission is stuck in gear, and I have no idea why. Not really well versed in manual transmissions and would appreciate any help. I am pretty certain there is nothing I could have possibly installed incorrectly. I used a conquest manual, and it had no problem shifting prior. I just didn't have any petal, and the clutch material had exploded.