Search the Community

IT WOULDNT LET ME POST THIS IN THE FAQS AND HOW TO SECTION SO IM POSTING HERE LOOKING FOR HELP I have some 92mm je forged pistons i am trying to sell and have a potential buyer set up... they buyer wants to know specs on compression ratio, but i know nothing about them other than brand and bore size( got them with a parts car and dont have nothing to use them in), only two markings on them are 92m and je, is there any way to determine the compression ratio on them without having them installed in a engine? they potential buyer says je charges 75 dollars to identify pistons and i am hoping to get them figured out to make this sell, any help is greatly appreciated!!!!

EDIT: PICS CAN BE SEEN ON CRAIGSLIST LINK BELOW IN THE REPLIES ALL PARTS FROM A 87. i have for sale a driveshaft, a radiator with fans and shroud, a oil pan, a BLOWN turbo (TURBO IS NO GOOD, can be rebuilt, fins are chipped and bearings are bad) and set of 4 je performance forged pistons(92mm). driveshaft has a little surface rust on the end, radiator does not have a cap, and pistons are good but rods are not, rods will come with the pistons anyway. do not have pics of turbo or oil pan right now but can get some and post or send.... located in lexington north carolina but can ship with payment via pay pal, or you can pick up if you live close or are willing to travel to me pricing: MAY NEGOTIATE ON PRICING.... driveshaft 100 radiator 150 pistons 250 turbo 25 oil pan 75 PRICES DO NOT INCLUDE SHIPPING!! i can be reached here or via text message at 3362253053

set of je forged pistons and stock milled rods out of 88 2.6 conquest one rod spun, miles unknown price 450 pay pal or pick up only! pics and info in link below http://winstonsalem.craigslist.org/pts/4334777437.html

first off, couldnt get pics to upload if you are interested i can send pics via text or email my friend got a conquest to do a 318 swap and it has a ton of 2.6 parts in the back. ALL PART'S RUNNING CONDITION/MILES ARE UNKNOWN and sold AS IS!!!!!! car has 130xxx on it dont know when pistons and rods were put in but pistons dont look to have alot of miles on them but no way to really tell Contact via email or text message, if you must call leave a message and we will return as soon as possible 336-225-3053 located in lexington nc may travel a little, may ship via pay pal payment at buyers expense Parts include: dash( not greatest condition, pics will come soon) down pipe and exhaust manifold je performance forged pistons bottom of piston says 92mm piston rods, friend said they were stock but shaved and polished intake manifold valve cover oil pan starter air intake? timing chain(used but condition appears to be good) there are some transmission parts in there as well just dont know what PRICE IS 750 AMERICAN CASH DOLLARS(pistons new alone are 600+) But: price is real negotiable, throw a good offer and maybe we can work something out, also looking for a good hood for conquest may be able to do some partial trading. delivery may be possible for the right negotiation Picture of trunk (could not upload) shows all parts not sure what all is there ( TURBO NOT INCLUDED BUT CAN BE THROWN IN FOR THE RIGHT PRICE (bearings shot))(driveshaft, and radiator also not included)

Looking for a set of used or new aftermarket pistons. .10 over bore. let me know what cha got and a price. please and Thank You - Geoff

rods and JE .040 pistons $250 shipped http://i116.photobucket.com/albums/o23/1skillz/null_zpsb7adf514.jpg http://i116.photobucket.com/albums/o23/1skillz/null_zps5471db05.jpg radiator $100 shipped http://i116.photobucket.com/albums/o23/1skillz/null_zps7ff70d01.jpg

I have a brand Spanking new (Major) engine rebuild kit that i purchased from RPM Machine Shop online early this month. I have since went a different route so i dont need this kit. It comes with all gaskets, standard pistons,rings,main bearings,rod bearings. I only opened up the package once to take a look at the Factory Pistons.! This Kit Goes for $238.99 on there website and cost me a total of about $269.00 Shipped. Looking to help out another Starquester and Letting it go for $200.00 Shipped! Here is the Website if you wanna take a look yourself!! http://www.rpmmachin..._detail&p=223 Paypal is Detriuch@gmail.com. Will trade for Airdam

I'm parting out my 87' 2.6 motor to do a motor swap. I have everything, The crank will need to be polished....I spun a rod bearing a while ago and was gonna rebuild it but I have changed my mind. I have a new, still in the package, AJUSA head gasket that I got from engine machine service and I also have all the lower and upper gaskets, all brand new. Tranny shifts great..No grinds or slips. Clutch has 600 miles on it. It's a stage one clutch from eBay......Have all the stock intercooler piping, stock intercooler, pretty much everything needed to put back together. The pistons and rods are still good, Just need new main and rod bearings. The head has no cracks. The block is cleaned up and ready to go. I will have pics up soon. Make offer on parts you need or want. Please PM me or call/text 815-302-6897. Thanks, Brad Will be posting more here in the next few days. I still need to pull the ECU and all that good stuff.

i am looking for a 4G64 6 blot wideblock to start my new engine build for my starquest i really dont care what condition the block is in as long as it turns over and dosent have a hole in it. Im looking for a complete block but will take a bare block to i live in oregon so the closer the better but if i have to pay shipping no big deal so let me know what you guys have thanks

4 used 8:2:1, .040 over JE heat coated tops Forged pistons and floating pin Reconditioned rods $ 450 shipped obo http://i116.photobucket.com/albums/o23/1skillz/IMAG0738.jpg http://i116.photobucket.com/albums/o23/1skillz/IMAG0737.jpg http://i116.photobucket.com/albums/o23/1skillz/IMAG0736.jpg http://i116.photobucket.com/albums/o23/1skillz/IMAG0735.jpg http://i116.photobucket.com/albums/o23/1skillz/IMAG0743.jpg

The early style g54b used 2.0mm top rings, and later went to 1.5mm top rings by 83... so that would mean the 1.5mm top ring style pistons would have a thicker, and thus stronger ringland?? Apparently there are two styles of hyper-u pistons, 2.0mm vs 1.5mm rings... and I'm wondering which to go with. -Robert