Search the Community
Showing results for tags 'multiport'.
-
Over the past few years I've reconfigured quite a few items on my car and now have some extra items I no longer need........ Intake manifold was run on the car for 2 years with me in addition to the 2 prior owners of the car. The manifold was originally built by quest925 ( http://www.starquest...topic=58298&hl= ). It has had some modifications along the way. Firstly at some point the throttle body was welded to the manifold. Secondly a the rear coolant port was opened up in order to flow to the heater core. The original paint had gotten pretty bad from heat/chemicals so I cleaned the majority of it off. Other bits: throttle body is a 65mm BBK for a 86-93 5.0L mustang, works with stock throttle cable, uses an inline thermostat housing (not in photos but will supply with intake). Manifold made good power and was very streetable. I would recommend the throttle body be cut off and a different TB put on. Like ALL BBK throttle bodies it suffers from vacuum lock at small throttle openings. http://i1101.photobucket.com/albums/g428/sq_spoon32/P1010049_zps90955cd3.jpg http://i1101.photobucket.com/albums/g428/sq_spoon32/P1010050_zps42efa360.jpg http://i1101.photobucket.com/albums/g428/sq_spoon32/P1010051_zps550f42fc.jpg http://i1101.photobucket.com/albums/g428/sq_spoon32/P1010052_zpsaf8afa3b.jpg Also for sale is an EDIS setup excluding the VR sensor and trigger wheel. EDIS module was purchased new and has less than 1000mi on it. Coil pack is a high discharge unit from ACCEL. http://i1101.photobucket.com/albums/g428/sq_spoon32/P1010053_zps1e1fee9c.jpg http://i1101.photobucket.com/albums/g428/sq_spoon32/P1010054_zps16b9ba37.jpg Asking 350$ for the manifold and 70$ for the EDIS components. Will consider offers. Thanks, --Eric
-
I have a Magna multiport intake manifold with fuel rail with an SDS EM4F with ignition for sale it is not a complete kit. kit was installed in 2004 and car was running until car was stored 2 years ago and removed 2 days ago. Car was sold. missing: Sync and trigger magnets (get them from SDS) fuel injectors throttle body fuel pressure regulator. Had to get rid of the Starion because of growing family. SDS has LCD programmer and fuel dial includes 4bar sensor, water temp sensor, air temp sensor and Harness, stand alone ignition You may want to get new harness from sds if you find it too short. Asking $900 or offer. (Im in Hawaii) e-mail me j5_jeffrocks@yahoo.com
-
Looking for a complete or "near" complete MPI setup for my 87 starion. 14g with 89 ecu and 20 psi just isnt cuttin it anymore. Let me know what you got.
-
SOLD Used Aluminum MPI built by Maxboost. Owner is not on the boards. Just tryin to move it for him. Satin Black PC Stock Tstat placement 65mm TB TPS & CTS included 680cc Mopar StgII Injectors http://i1250.photobucket.com/albums/hh538/sqperformamnce/4sale/photo2_zps771a38ba.jpg http://i1250.photobucket.com/albums/hh538/sqperformance/4sale/photo5_zpsed22de68.jpg http://i1250.photobucket.com/albums/hh538/sqperformance/4sale/photo1_zps8386538b.jpg http://i1250.photobucket.com/albums/hh538/sqperformance/4sale/photo3_zpsa7ae3ea8.jpg http://i1250.photobucket.com/albums/hh538/sqperformance/4sale/photo12_zpsbac53134.jpg $650obo
- 11 replies
-
- standalone
- dyno
-
(and 4 more)
Tagged with: