Search the Community

Over the past few years I've reconfigured quite a few items on my car and now have some extra items I no longer need........ Intake manifold was run on the car for 2 years with me in addition to the 2 prior owners of the car. The manifold was originally built by quest925 ( http://www.starquest...topic=58298&hl= ). It has had some modifications along the way. Firstly at some point the throttle body was welded to the manifold. Secondly a the rear coolant port was opened up in order to flow to the heater core. The original paint had gotten pretty bad from heat/chemicals so I cleaned the majority of it off. Other bits: throttle body is a 65mm BBK for a 86-93 5.0L mustang, works with stock throttle cable, uses an inline thermostat housing (not in photos but will supply with intake). Manifold made good power and was very streetable. I would recommend the throttle body be cut off and a different TB put on. Like ALL BBK throttle bodies it suffers from vacuum lock at small throttle openings. http://i1101.photobucket.com/albums/g428/sq_spoon32/P1010049_zps90955cd3.jpg http://i1101.photobucket.com/albums/g428/sq_spoon32/P1010050_zps42efa360.jpg http://i1101.photobucket.com/albums/g428/sq_spoon32/P1010051_zps550f42fc.jpg http://i1101.photobucket.com/albums/g428/sq_spoon32/P1010052_zpsaf8afa3b.jpg Also for sale is an EDIS setup excluding the VR sensor and trigger wheel. EDIS module was purchased new and has less than 1000mi on it. Coil pack is a high discharge unit from ACCEL. http://i1101.photobucket.com/albums/g428/sq_spoon32/P1010053_zps1e1fee9c.jpg http://i1101.photobucket.com/albums/g428/sq_spoon32/P1010054_zps16b9ba37.jpg Asking 350$ for the manifold and 70$ for the EDIS components. Will consider offers. Thanks, --Eric

We just got a block off plate for our egr on a 1989 conquest. I cannot find where this goes into the manifold. It goes to the secondary air cleaner with the vacuum line coming off, but I dont see where it goes into the intake. There is a tube on the bottom of the secondary air cleaner that isnt connected to anything. Is that it? Not sure if its already been deleted and they just left of piping and aircleaner still in. thanks

SFP ceramic coated tubular exhaust manifold. Paid $650. Flange for factory internal waste gate TD05 turbo. Custom down pipe required. Can be tapped for T3 or T4. Does not have provision for external wastegate. Don't think they are still in buisness. So I guess it is a rare part. Never been installed. Can send pictures if interested. Seriously I bought this ten years ago. I am using Treadstones T3 manifold now, with Garrett T3-T04E turbo. $500 Firm

***SOLD*** FOR SALE: Magna MPI Intake Manifold | $550 Shipped Included: Trilogy Turbos fuel rail (Silver) & 2004 V6 Mustang throttle body I was informed by the previous owner that this manifold was modified by Chad. It has never once been used. I am selling everything as-is, and will not be removing any included items to lower the price. I am selling it for what I paid for it, so the price is firm. http://i1144.photobucket.com/albums/o498/TrustConquest/8f164ac2-5f7a-4284-9431-18622cecc21e_zps510da406.jpg?t=1398134779

Hi Guys. I have a turbo set up off my old car. It is a Garrett/ AiResearch T4 with external wastegate w/ dump. Custom exhaust manifold for G54b head. NOT a ragged out/needs rebuilt piece of Ebay crap. The trolls informed me the other night I was out in left field with my price, so it is $650 now. No BS, No Drama. PM me for paypal info. Shipped with insurance and tracking. Thanks guys. Pics can be found here. http://desmoines.craigslist.org/pts/4317537387.html

Looking for a complete or "near" complete MPI setup for my 87 starion. 14g with 89 ecu and 20 psi just isnt cuttin it anymore. Let me know what you got.

Location: San Antonio, Texas Well, I've decided that I'm going to have to cut my losses at the moment on this project and sell off all the fancy (and OEM) parts I've accumulated over the past few months. I'm willing to ship pretty much everything unless otherwise noted, and all the prices on the items I'm selling are negotiable within reason. If you have any questions or want any additional pictures of the parts, just let me know. In addition to all the parts I'm listing, I also have an '87 Conquest rolling chassis that I'd like to move as well. If nobody has any interest in picking up the whole thing, I'm willing to part out the major components. Just shoot me a PM and I'll let you know what is and isn't on the car at the moment! Anyways, on to the parts! SHP Wheels with tires - SOLD NJV Head with extras - SOLD Mitsubishi Valve Cover - SOLD Ported Intake Manifold - $300 This intake manifold is the whole Lower Shores Performance sha-bang. Ported mixer manifold, 52mm throttle body, ported intake manifold, 650/950 injectors, EGR delete, brand new thermostat, thermostat gasket, intake manifold gasket and most of the bolts on it are brand new allen bolts as well. I'm also including all of the peripherals that are connected to the manifold, making this a virtually plug-and-play deal. I bought the manifold, TB and mixer manifold from Brian a few months ago, but never got the chance to even give it all a test run other than idling, so this entire setup has virtually zero miles on it. http://i822.photobucket.com/albums/zz145/ShadowZ32/_DSC1093437.jpg http://i822.photobucket.com/albums/zz145/ShadowZ32/_DSC1095439.jpg http://i822.photobucket.com/albums/zz145/ShadowZ32/_DSC1094438.jpg http://i822.photobucket.com/albums/zz145/ShadowZ32/_DSC1096440.jpg http://i822.photobucket.com/albums/zz145/ShadowZ32/_DSC1097441.jpg 3SX Stainless Steel Brake Lines - $80 Brand new, never installed, just took these out of the packaging to take pictures of them. These retail for $106.95 + shipping. Just looking to sell these quick! http://i822.photobucket.com/albums/zz145/ShadowZ32/_DSC11002479.jpg http://i822.photobucket.com/albums/zz145/ShadowZ32/_DSC11012480.jpg

Stuff is now listed on ebay. Turbo w/ wastegate and lines is listed together, manifold and downpipe are listed together. If anyone is interested in purchasing this outside of ebay please contact me. I will leave this post of up for info purposes. ebay thread: http://www.starquest...howtopic=135912 First up, Chad T3/T4 tubular header, Header is in good condition w/ no cracks. Set up for internal wastegate. Braced along the top and bottom.http://www.starquestclub.com/forum/uploads/gallery/album_1127/gallery_7736_1127_30216.jpghttp://www.starquestclub.com/forum/uploads/gallery/album_1127/gallery_7736_1127_32770.jpg Garret T3/T04e w/ external WG. I dont know what PSI was set (i never ran it). 57 trim compressor w/ A/R .50 housing Stage 1 turbine w/ A/R .48 housing Journal bearing (oil and water cooled) Spins beautifully w/ no shaft play http://www.starquestclub.com/forum/uploads/gallery/album_1127/gallery_7736_1127_36568.jpg http://www.starquestclub.com/forum/uploads/gallery/album_1127/gallery_7736_1127_13479.jpg 2.5" DP w/ O2 sensor bung. http://www.starquestclub.com/forum/uploads/gallery/album_1127/gallery_7736_1127_116757.jpg (best pic I have showing the DP mounted) http://www.starquestclub.com/forum/uploads/gallery/album_1127/gallery_7736_1127_71731.jpg Stainless 6AN fittings for coolant and oil (see above pics as well). The lines are AN fitting on the turbo side and the oil feed engine side (includes the adapters), clamp on for the water fittings on engine side. Oil return is regular rubber clamped on both ends. http://www.starquestclub.com/forum/uploads/gallery/album_1127/gallery_7736_1127_90576.jpg Inlet intake w/ vacuum ports - $25 http://www.starquestclub.com/forum/uploads/gallery/album_1127/gallery_7736_1127_40856.jpg Everything sitting installed (previous owner) http://www.starquestclub.com/forum/uploads/gallery/album_1127/gallery_7736_1127_16642.jpg http://www.starquestclub.com/forum/uploads/gallery/album_1127/gallery_7736_1127_18718.jpg

For sale is a intake brought over from Australia. Looking for $400+shipping. Includes the fuel rail.

So I figured I'd post this here as I feel like a newb asking and I didn't see anything about it in my searches. http://www.ebay.com/itm/Mitsubishi-Starion-Conquest-T3-Stainless-Turbo-Manifold-/270953464370?hash=item3f1615c232&item=270953464370&pt=Motors_Car_Truck_Parts_Accessories&vxp=mtr#ht_3255wt_1163 It's a T3 manifold for our (4G54B) cars. Seems like it could spell out G-O-O-D F-U-N But, with good fun also comes the possibility for D-I-S-A-S-T-E-R Let me know what you guys think. I don't mind being the test dummy on this one, I think it'd be interesting.

I am going a different route, unuse never been mounted SMB T4 manifold $250 shipped http://i116.photobucket.com/albums/o23/1skillz/IMAG0714.jpg http://i116.photobucket.com/albums/o23/1skillz/IMAG0712.jpg http://i116.photobucket.com/albums/o23/1skillz/IMAG0711.jpg http://i116.photobucket.com/albums/o23/1skillz/IMAG0709.jpg http://i116.photobucket.com/albums/o23/1skillz/IMAG0708.jpg http://i116.photobucket.com/albums/o23/1skillz/IMAG0715.jpg