Search the Community
Showing results for tags 'lines'.
Found 2 results
-
so im doing a s13 rack n pinion swap using a s13 cross member just re drilled the mounting holes to fit a starion, welding on the starion motor mounts to it and using either s13/ s14 lca's that i will box in and re drill holes for the tension arms and sway bar. so now before i start the full swap i have a couple of question for people who have or now how to do the swap which are how do you connect the s13 rack to the starquest steering column i was just thinking of welding the end piece of a s13 column to the starquest one but idk if it will be the right length and the right angle can be made, what do you guys do for the power steering lines do they have to be ss lines or dose just normal rubber p/s line work and what ball joint fits the starquest knuckle a s13 or s14 or do you just have to re drill the hole. any help will be greatly appreciated thanks
-
Anybody interested in a kit for braided oil cooler lines? Put together a set at a hardware surplus shop the other day and they look pretty good Not sure on the availability of the parts, but if anybody wants one made i can put it together and ship for $125 <- parts are about 115 All high performance earls plumbing parts, and 3/8 (6an?) braided hose Includes fitting for 6mm (previously banjo fittings) in/out on the oil filter housing as well as the oil cooler - straight hose connectors for the filter housing side, and 90 degree ones for the cooler side (to clear hood) Can put together for any oil lines, also made one for remotely installing my electric oil pressure sending unit Hit me up if there's any interest, have no problem putting kits together and shipping at cost Thanks Aaron will post a picture after install is done Gaskets! one set of Randy's oil cooler banjo fitting gaskets will be needed to install correctly, my oem gaskets are long gone just one set, since its not a banjo fitting, there is no need to have one on each side
