Search the Community

Over the past few years I've reconfigured quite a few items on my car and now have some extra items I no longer need........ Intake manifold was run on the car for 2 years with me in addition to the 2 prior owners of the car. The manifold was originally built by quest925 ( http://www.starquest...topic=58298&hl= ). It has had some modifications along the way. Firstly at some point the throttle body was welded to the manifold. Secondly a the rear coolant port was opened up in order to flow to the heater core. The original paint had gotten pretty bad from heat/chemicals so I cleaned the majority of it off. Other bits: throttle body is a 65mm BBK for a 86-93 5.0L mustang, works with stock throttle cable, uses an inline thermostat housing (not in photos but will supply with intake). Manifold made good power and was very streetable. I would recommend the throttle body be cut off and a different TB put on. Like ALL BBK throttle bodies it suffers from vacuum lock at small throttle openings. http://i1101.photobucket.com/albums/g428/sq_spoon32/P1010049_zps90955cd3.jpg http://i1101.photobucket.com/albums/g428/sq_spoon32/P1010050_zps42efa360.jpg http://i1101.photobucket.com/albums/g428/sq_spoon32/P1010051_zps550f42fc.jpg http://i1101.photobucket.com/albums/g428/sq_spoon32/P1010052_zpsaf8afa3b.jpg Also for sale is an EDIS setup excluding the VR sensor and trigger wheel. EDIS module was purchased new and has less than 1000mi on it. Coil pack is a high discharge unit from ACCEL. http://i1101.photobucket.com/albums/g428/sq_spoon32/P1010053_zps1e1fee9c.jpg http://i1101.photobucket.com/albums/g428/sq_spoon32/P1010054_zps16b9ba37.jpg Asking 350$ for the manifold and 70$ for the EDIS components. Will consider offers. Thanks, --Eric

Hey all, trying to clean up all the junk from my parents garage that I dont want to move to mine. I have a lot of stuff. I dont mind shipping the small stuff, but bigger stuff would be for pick up only. All prices are plus shipping/ paypal fees. 88-89 240mm flywheels. 1 is the stock weight, the other has been lightened to 21.5 pounds. $60 for the stocker. http://i45.photobucket.com/albums/f79/philipbmckinney/IMG_20150628_201025194_zps0e7q7jeb.jpg http://i45.photobucket.com/albums/f79/philipbmckinney/IMG_20150628_201049689_zpsvp2huyiv.jpg 2 known good starters. $ 20 each http://i45.photobucket.com/albums/f79/philipbmckinney/IMG_20150628_180620446_HDR_zpsq0plwagq.jpg 88-89 6 bolt axles (3 definitely need rebuilt, 3 have cracks in the boots but havent ripped yet. Could be used as is, but I'd recommend new boots since they are off the car anyways $40 per for the good ones, the bad ones free to pick up, or 10 plus ship. (pending sale) UPDATE- I still have the good ones. I got a quote to oregon and it was about 51 shipped. If anyone is interested in them, I can ship out asap. http://i45.photobucket.com/albums/f79/philipbmckinney/IMG_20150628_152514149_HDR_zpsn5nq7fkb.jpg 3 Starter plates (I dont really know the right term?) $20 a piece http://i45.photobucket.com/albums/f79/philipbmckinney/IMG_20150628_180354550_HDR_zpse46d144d.jpg 2 flywheel inspection plates $15 each http://i45.photobucket.com/albums/f79/philipbmckinney/IMG_20150628_180458834_HDR_zpsqyl6bwrt.jpg I also have 2 engines. One came from a car with 80k miles. The guy did a bsek and didnt do something right, and it didnt have oil pressure. I did hear the motor run before i pulled it, it didnt knock, but had noisy lifters. It does have a non jet head and ARP head studs. $300 The other engine was a fresh rebuild, and didnt have oil pressure either. I heard it run before I pulled it, and again, no knock, but was noisy. Being a fresh rebuild that never ran correctly, i'd think you should plan to go through this motor pretty well. $175 Any questions feel free to pm or call/text me (804) 314-5938. Paypal is philipbmckinney@gmail.com I have more stuff ill be posting in coming days (turbos, turbine housings, an 88-89 rear end i believe, all kinds of other stuff) Any questions just let me know!

I have in my posession a Fidanza flywheel signed by Professor Quest himself, along with a Stage 3 clutchnet clutch and pressure plate rated for 600 pound feet torque. Came to me as part of a parts bundle, appears to have very little use. http://picturehosting.com/images/oblique9881/photo1_4.jpg http://picturehosting.com/images/oblique9881/photo2.jpg http://picturehosting.com/images/oblique9881/photo3_3.jpg http://picturehosting.com/images/oblique9881/photo4.jpg Looking for $500 plus shipping, no additional charge for the PQ autograph. Pressure plate bolts and flywheel bolts included. Pilot bearing included but feels pretty sketchy, you'll want a new one plus a flywheel dowel pin.

I have a new 88 OEM Clutch and Fly Wheel for sale from NAPA. I installed them on my car and never drove it, now I'm selling everything. 130 Shipped for the Clutch and 130 Shipped for the Fly Wheel. Pictures available just let me know.

I am looking for an 88/89 240mm flywheel. Doesn't need to be resurfaced already, I can take care of that. It will be going to 97006.

I picked this up as an extra but it looks like im not going to need it. It will need to be resurfaced. I was told it came off of an 87 manual quest. Looking for $25.00 plus shipping

Hey fellas, Looking for a 88-89 240mm flywheel, either aftermarket like Fidanza or Competition Clutch (or HKS!), or maybe a lightened stocker. Reply or PM me, thanks!

Hi, I am looking for a good flywheel and pressure plate combo without a clutch from an 88-89 starquest. I am a college student, so my funds are kind of low. Please call me and we can work out a price. My number is 763 - 218 - 5781 Mike! Thank you! Call anytime between 10am - 10pm Text any time you want!

http://i281.photobucket.com/albums/kk206/calebwhetzell/360%20Conquest%20project/012-1.jpg Brand new luk hd pressure plate with clutch align tool never installed http://i281.photobucket.com/albums/kk206/calebwhetzell/360%20Conquest%20project/011-2.jpg http://i281.photobucket.com/albums/kk206/calebwhetzell/360%20Conquest%20project/008-2.jpg New exedy clutch disk installed and car drove maybe 50 miles... http://i281.photobucket.com/albums/kk206/calebwhetzell/360%20Conquest%20project/010-2.jpg http://i281.photobucket.com/albums/kk206/calebwhetzell/360%20Conquest%20project/009-2.jpg $100 shipped

well the good news is there off! but I need to replace them. I know Randy at enginemachineservice.com sells the OEM ones... probably what I will go with. Just want to know if there is an alternative? A bolt that has a bigger sholder would be NICE next time I have to change the clutch!

Hey everyone, I have a brand new Fidanza flywheel from an aborted project. 10.5 lbs. Never installed, includes the original dowel pins. Looking for $300 shipped OBO, or local pickup works too. Located in Pittsburgh, PA. Shoot me an email, http://i.imgur.com/wm9S3.png. Thanks! Pic added: http://i.imgur.com/HhuQr.jpg