Search the Community

Here's another one fellas! Some of you had been asking for these so I went ahead and created them as well. A ton of time went into getting these correct, but all-in-all I think they turned out well. These are "identical reproductions" of the original HVAC control faceplates for the model years 1988-1989. Removal of the original is similar to the earlier overlays that I offered here. Replace yours which may be worn out, or if your tired of the Star Wars Orange look or if your ride is themed differently perhaps with Mookeeh overlays then go with a new White one. The choice is yours: These are available in 2 colors. OEM Orange: http://i1234.photobucket.com/albums/ff408/n8tallica1/SQC%20Items/DSC01739.jpg White: http://i1234.photobucket.com/albums/ff408/n8tallica1/SQC%20Items/DSC01740.jpg Both are self-adhesive, just remove the original, clean the faceplate mounting surface align and apply the new one. http://i1234.photobucket.com/albums/ff408/n8tallica1/SQC%20Items/DSC01735.jpg *Please note the backlit portions of the buttons (i.e Economy, Auto, Up, Down, Fans, Defrost, Face/Floor Defrost etc...) will be clear, along with the small openings for the orange on/off LEDs when the adhesive backing is removed. I did make one tiny little change to these, but I don't think anyone will object, or notice for that matter. Pricing for either one of these items will be $25.00 shipped anywhere in the U.S usually within 1 day of ordering. My paypal address is: natallica@comcast.net *In the Paypal notes please provide the preferred color overlay along with you mailing address and screen name. DIsclaimer I assume NO responsibility in ANY damage done to your faceplate if you choose to purchase one of these kits for yours, I am only offering these (and these walk-throughs) as an inexpensive cosmetic replacement to old worn out buttons. Apart from finding a brand new unit (which is impossible) this is the only option that I can think of, so if you think you are mechanically inclined enough to dismantle and scrape glue and metal and clean surfaces...then by all means grab one of these kits. It's relatively easy to do if you take your time and be thorough in the prep, you should be happy with the results. No overlays will be replaced 'free of charge' due to faulty preparation. *Faceplate in photo not included Thanks Guys, lemme know what you think! -N8

i need 88 6bolt 5 lug axles shaft or shafts for my 88. i hit a curb and bent one. i already have bearings and seal. need everything else. paypal ready. my cars my daily. i need it like yesterday. thanks.

I'm going attempt to rebuild my engine! I've purchased a bsek, full gasket set, head bolts, water pump, fuel injectors, wires, plugs, coil, cap, rotor button, rod bearings, and all hoses and belts. Anything else I really need to get while I have the engine out and apart?

http://newyork.craigslist.org/brk/cto/4888212824.html

Thread closed. Car no longer for sale. Thanks.

http://i1146.photobucket.com/albums/o538/nycain/Mobile%20Uploads/2014-12/IMG_20141218_152451.jpg

Hello everyone. I know it seems I don't contribute...... well I hope that will soon change. I am in search of an 88 or 89 Conquest or Starion, prefer 5 speed. I am leaving out Friday after work to look at a 88 White, non running, 5 speed with leather, body in nice shape, and a 89 black, running auto also with leather, front seats need work and both quarter panels have rust..... both are 7 hours away from me but 15 minutes from each other..... Now on the other hand I have found one only an hour and a half away that is also white, not running, auto, with cloth interior. body good shape and a shp car with the stock wheels. Both cars 7 hours away $2k each the closer $3k...... I am willing to drive for one, prefer 5 speed, also I think I would prefer leather, but would really love to find a nice running car......... Your thoughts or maybe you have a lead on a 4th car that is just what I am looking for?????? BTW the 5 speed has been modded and has a Talon MAF and hasn't ran since it was put in. Other than that it has a new head, JE forged pistons, T3/T4 turbo, hard pipe conversion, new crank shaft. all of this is according to the seller..... of course, and a new clutch. Said it would start but not run. It also sounds like a SHP car, has adjustment on rear struts....

Good condition. Not driven since '94. Stored and covered in an open shed so paint is still pretty good. Interior is in good condition, Front seats and dash have no defects. Tires are dry rotted of course and wheels have some peeling. Front air dam is decent. There is a slight dent in the passenger door. There is also a small dent on the river's side part of the 3 piece spoiler. Motor was removed and partially disassembled. Motor and all parts including the turbo to go with the car. I'm sorry but I will not part-out.Can deliver within 100 miles of Atlanta, Birmingham or Chattanooga for cost of round trip fuel from zip code 35959 (Cedar Bluff, AL). http://i1276.photobucket.com/albums/y471/88conquest/bth_IMG-20120428-00434_zps9e4851a9.jpghttp://i1276.photobucket.com/albums/y471/88conquest/bth_IMG-20120428-00425_zps342e4bc1.jpg

I am looking for an 88/89 240mm flywheel. Doesn't need to be resurfaced already, I can take care of that. It will be going to 97006.

hey guys just looking for some things...added a few things: could use some odds and ends to finish up my 88. -t3 manifold, -walboro/bosch fuel pump, -88/89 seats (pref black leather), -83 hood, -valve cover (mitsu script pref.), -oil pan, -coilovers, -shp or wider wheels for the rear, -3 inch 4 bolt downpipe, -newish short shifter, -stage4 6puck clutch, -flywheel (new stock or newish fidanza), -roll cage (not a full), -dual gauge pod for pillar as well. let me know! jcolvin25@gmail.com 540-490-0574

I searched, but could not find an answer. Will a 88 distributor work in a 87? My car is a 87 5sp widebody. The only engine mod is hard pipes with a bov.

I'm reading around the forums here, and I'm getting really mixed opinions on swapping my '87 ECU with an '88-'89 ECU. Is this whole swapping thing just a theory? Or has it really been tested and proven to be better?

Hi, I am looking for a good flywheel and pressure plate combo without a clutch from an 88-89 starquest. I am a college student, so my funds are kind of low. Please call me and we can work out a price. My number is 763 - 218 - 5781 Mike! Thank you! Call anytime between 10am - 10pm Text any time you want!

Hey Im looking to get ahold of a K frame that will work for my 88 starion. The idiot who owned this car before me did some nasty welding on after he managed to twist it. if anyone is parting one out let me know a price! im located in modesto, california. thanks.

All switches $30 each/ gauge pod $100 whole/ gauge cluster sold! / rear lthr seats sold! whole but will split up/ $50 hatch trunk cover/ $30 window motor each/ $40 door glass each/ $100 door panel whole assembly/ wiper cowls sold! / $30 headlight motor/ $30 each seatbelts any misc. Pieces $25 each all prices are negotiable via call or txt any other ? Call or txt if i didn't list ur piece just ask (608)477-5714 all prices do not include shipping u pay to ship:)