-
Posts
7472 -
Joined
-
Last visited
-
Days Won
29
Content Type
Profiles
Forums
Calendar
Gallery
Everything posted by TexasQuest
-
Front strut KYB cartridge loose after tightening?
TexasQuest replied to Mech's topic in Just plain ol' B.S.
I believe the SHP strut housings are a little taller than the non-SHP housings since they weren't designed to be replaced with a cartridge. -
Well at least you got it fixed along with some new parts. 😏
-
Welcome. A good rule of thumb is get the car running good before increasing performance. Maintenance before modifications.
-
Car died while driving--wouldn't restart
TexasQuest replied to nc_beagle's topic in Virtual Mechanic
Usually when a vehicle dies only when turning in one direction it is a grounding issue. I would start with the ignition switch and work your way down. -
Welcome. Great to see that car is still around.
-
Check you injector pigtails
-
The only way to know for sure if the car is running too rich is installing a wideband 02 sensor.
-
hard clunk when turning steering to the right
TexasQuest replied to Mech's topic in Virtual Mechanic
Some refer to them as Gland Nuts. -
Welcome to the club!
-
I have a set of metric crowfoot flare wrenches. I'm replacing it with a braided steel flex line so I'm not too worried about the re-install, mainly getting to the fitting on top of the steering box. I'll probably just cut the old line out in sections to remove it easier. Wish me luck guys!
-
I'm looking at tackling my leaky power steering pressure line soon. Do I have to remove the master cylinder to gain better access to the fitting where it goes into the steering gearbox? It's a tight fit in there and I definitely do not want to round the fitting out.
-
Dads Engine Parts llc. - Conquest (enginemachineservice.com)
-
Great video. It's so satisfying to watch them clean cars like that!
-
Not enough demand, like most Starquest stuff.
-
These cars have what's called an ECI relay. It's mounted above the ecu behind the passenger side kick panel.
-
Welcome back. Beautiful car!
-
It's only a matter of time. The DSM guys have been having issues with him too.
-
Starion Conquest wiper cowl - Motocam360.com
-
Very nice!
-
Not sure about other Mitsubishi models. The factory one has long been discontinued MB337860.
-
Tell me about it. It's been frigid here in Texas too. Way too cold to tinker in the garage.
-
I've noticed that too.
-
I've had good luck with white lithium grease spray.
-
Highly doubtful. More than likely get a good used one from a parts car.