gofastredstar
-
Posts
398 -
Joined
-
Last visited
-
Days Won
1
Content Type
Profiles
Forums
Calendar
Gallery
Posts posted by gofastredstar
-
-
Ill take that center console with the mirror controller shown in picture one plz.
-
interested too
-
Can you just drill out the orifice to a bit larger size? I wouldnt think that would have to be opened up much to get the desired rpms.
-
Cool, thanks Scott, I will get one on order. Nice write up too Lion, but I dont want to redesign my throttle setup. I think this solution will work good enough, especially since it just a "toy" car anyway and only gets driven a few times a year.
-
And Scott, get one that is normally open or closed?
-
Cool Scott. You have a prefered vendor for this valve? This one is working good for boost.
-
So Im running a FIP system that has been modded at least twice by Scott87star. While it runs good, it idles low when cold. I can pull the vacuum line off the intake manifold, the idle goes right up. So thinking I can get an another air bypass valve like the one Scott used for the boost controller.
Then I could wire that up to the ECU and plumb it into the manifold, to bleed air in until a set temp. Anybody run something like this? Or can Scott step in with a suggestion?
Thanks, John
-
3 in line on tails plz
-
Im in. I had a great time too.
-
I'll take one. Thanks for taking the time to work this out.
-
Bahahaha, i know you mean, the brides! Right you are sir.
-
Yea, the pict frames are cool. Heres mine.
-
1
-
-
Cool, PM me price plz.
-
Thats what I am looking for. Where is it cracked? Condition, like most I am wanting good but I'm sure that one is good.
-
Thanks all. The part that Johnny has I already have. What I am needing is the entire panel that includes the shifter panel. My apologizes for not being clear. Here is a pict of what i need.
-
I need the top part of the center console, that holds the radio. The part that connects to the center console. I am looking for a 87-89 version. Thanks
-
PM me your price for that shifter/radio panel that's sitting on the floor and that eclipse steering wheel. Thanks
-
the location was very family friendly excellent place for a meet we really enjoyed ourselves wouldn't mind having it there again close to the boardwalk very good food in that area
Agreed Joe, maybe the holiday end, closer to the boardwalk? That way the boardwalk would be in walking distance and we could get the food easier too. But.. not griping a bit, the meet was awesome, and will be hard to improve on.
-
This meet was off the hook. Much thanks to Nick for putting it together, Joe, Phil, and Ryan for awesome display at the track, and Harry for the 2,3,4 for shots of whatever it was. My wife and I both a had a blast. Already looking forward to next year.
-
Bring it Paulie! Let see whatcha got.
-
This turbo have a data plate on it? If so can you send me a high res pict of it?
-
Not sold
-
your garage floor is TOO CLEAN
whats happenin brutha 
Lol Harry, its cuz I keep a conquest parted over it.
Life is good, how about you? Getting ready for October. You going to have your s*** together?
-
AEM UEGO Wideband Controller with Gauge and Sensor $100 plus shipping
This is an older stand along wideband controller. It has both the 1v and 5v outputs that can go to either a gauge or an ecu. Included is the sensor and the gauge. Its like this one ..... http://www.bmotorspo...products_id/536
I am selling it because my ecu can not ready voltages from this unit correctly. To explain, the gauge shows the correct AFR's but the ECU will not match up. I dont know if I have someting wrong with the setting on my ECU or the controller is to old, but it works great as a gauge.
26liter down?
in Just plain ol' B.S.
Posted