Rick_Tross Posted September 6, 2002 Report Share Posted September 6, 2002 My factory rears are blown and doors aren't far behind so they are being replaced with something nicer Polk MOMO 465 (6.5 inch) components in hatch, and the Polk MOMO 455 (5.25's) in the doors. That's it don't want a crap load of weight. Peace Rick Tross Link to comment Share on other sites More sharing options...
dizzydug Posted September 7, 2002 Report Share Posted September 7, 2002 Good luck with those rear speakers9getting them out)i would modify the shelf to let the 6.5's drop in from the top.With a little work 6.5's can be put in the doors.maybe from the door panel side.Not stock but much more sound.The dash speakers are a bit of work I hear but haven't tried to replace them yet. will have custom box built in place of rear seat with a set of Fosgate 15's. Link to comment Share on other sites More sharing options...
ralphyboy Posted September 8, 2002 Report Share Posted September 8, 2002 I personally love the Polk stuff but unless you already have them the momo and the DX series are phisically the same. The neat MOMO isn't there though, nor is the price. Also you might want to go with coaxs because they tend to take less power to drive, unless you have an external amp of coarse. No matter what they (the manufactures) say I have NEVER seen a review of a head unit that puts out more than 20 usable watts. Alpine is the only one that seems to be able to do that. Link to comment Share on other sites More sharing options...
Recommended Posts