tux Posted November 3, 2022 Report Share Posted November 3, 2022 (edited) I bought 1 of each available blades at my 2 local parts stores and none fit the pins I've been reusing for years is too short to go through these blade housings and into the arms. I tried bosch, Rain-x lattitudes, trico, and goodyear. No dice on any of them. No other blades around at least in my town Edited November 3, 2022 by tux Link to comment Share on other sites More sharing options...
GoldStar Posted November 4, 2022 Report Share Posted November 4, 2022 (edited) I read the Anco 4805 3/16in pins work, apparently they're in the "Anco Windshield Wiper Blade To Arm Adapter Kit 4815". I'm personally using wiper refills provided by one of the POs, NAPA 60-1914 and Trico 44-190. The Trico refills are the only ones I've used so far, they seem to work fine. Edited November 4, 2022 by GoldStar Link to comment Share on other sites More sharing options...
kev Posted November 7, 2022 Report Share Posted November 7, 2022 Yeah, I keep getting refills for the few sets of oem wipers I still have. It’s been difficult to find aftermarket wiper arms that actually fit good, well since forever. Even in the early 90s, they were hard to find. Even if they came with the pins, they never seemed to fit in the pin properly Link to comment Share on other sites More sharing options...
tux Posted November 7, 2022 Author Report Share Posted November 7, 2022 Maybe I'll have to lop off the ends and get j-hooks welded on Link to comment Share on other sites More sharing options...
TexasQuest Posted November 7, 2022 Report Share Posted November 7, 2022 A wiper arm conversion kit would be a nice option Link to comment Share on other sites More sharing options...
tux Posted November 7, 2022 Author Report Share Posted November 7, 2022 oh yea, one of these - https://www.amazon.com/XtremeAmazing-Universal-Windshield-Mounting-3392390298/dp/B085DL54F4/ref=asc_df_B085DL54F4/?tag=hyprod-20&linkCode=df0&hvadid=462958779505&hvpos=&hvnetw=g&hvrand=8855921889957181995&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9003991&hvtargid=pla-1038417642127&psc=1 ? I think welding might be prettier than having the 3 machines screws in each arm Link to comment Share on other sites More sharing options...
TexasQuest Posted November 7, 2022 Report Share Posted November 7, 2022 4 hours ago, tux said: oh yea, one of these - https://www.amazon.com/XtremeAmazing-Universal-Windshield-Mounting-3392390298/dp/B085DL54F4/ref=asc_df_B085DL54F4/?tag=hyprod-20&linkCode=df0&hvadid=462958779505&hvpos=&hvnetw=g&hvrand=8855921889957181995&hvpone=&hvptwo=&hvqmt=&hvdev=c&hvdvcmdl=&hvlocint=&hvlocphy=9003991&hvtargid=pla-1038417642127&psc=1 ? I think welding might be prettier than having the 3 machines screws in each arm Nice. I may just pick a set up to have Link to comment Share on other sites More sharing options...
Recommended Posts