BluFalcon16G Posted April 8, 2022 Report Share Posted April 8, 2022 Got a 88 Conquest with blown shocks, front and rear on stock springs. Ordered a set of the Mk1 Front and Rear struts for my car and was wondering if there would be any issues with using my stock springs with them. Someone local mentioned that they they were designed specifically for lowered cars with lowering springs. Just wanted to know if that was the actual case and if they'd work with stock springs instead. Link to comment Share on other sites More sharing options...
Turbo Cary Posted April 8, 2022 Report Share Posted April 8, 2022 Ideally yes they are different that the shock tube can travel lower into the shock but if you use stock springs then it won't compress as much. This shouldn't be a problem. Link to comment Share on other sites More sharing options...
TexasQuest Posted April 8, 2022 Report Share Posted April 8, 2022 Won't be an issue. They are valved a little stiffer if you want to use a lowering spring with them. Link to comment Share on other sites More sharing options...
BluFalcon16G Posted April 8, 2022 Author Report Share Posted April 8, 2022 Awesome. That's what I wanted to know. Thanks! Link to comment Share on other sites More sharing options...
Recommended Posts