2conquest Posted November 1, 2015 Report Share Posted November 1, 2015 Ieedsome help on my car but it wont let me post on the newbie Q&A. Should I post my questions here instead? Link to comment Share on other sites More sharing options...
importwarrior Posted November 2, 2015 Report Share Posted November 2, 2015 Looking in to it. Go ahead and post here for now. Link to comment Share on other sites More sharing options...
ucw458 Posted November 2, 2015 Report Share Posted November 2, 2015 You have more than 10 posts. Now you post questions in the VM section. Link to comment Share on other sites More sharing options...
Shelby Posted November 2, 2015 Report Share Posted November 2, 2015 this site has been screwing with my posts for years , very anorying 1 Link to comment Share on other sites More sharing options...
2conquest Posted November 2, 2015 Author Report Share Posted November 2, 2015 Oh okay, sorryhttp://cdncache-a.akamaihd.net/items/it/img/arrow-10x10.png about that. I wasnt aware after 10 you graduate from newbie. If you would like can you move it to the appropriate location. My 1988 conquest has oil pressure but the dash reads zero. While looking for answers I seen that the culprit might be a faulty oil sending unit because I have oil leaking from around the oil sending unit. My question is two parts1. What would it take to change the sending unit&2. Does anyone want to part ways with there working extra sending unit? Link to comment Share on other sites More sharing options...
ucw458 Posted November 2, 2015 Report Share Posted November 2, 2015 Try cleaning the electrical contacts first. Corrosion will stop it from working. Link to comment Share on other sites More sharing options...
Shelby Posted November 3, 2015 Report Share Posted November 3, 2015 if it is leaking ,, REPLACE IT ,standard auto parts part bottom of sender has place for wrenchbe sure to get sender for gauge not swt Link to comment Share on other sites More sharing options...
importwarrior Posted November 3, 2015 Report Share Posted November 3, 2015 oil pressure sender pic DO NOT use teflon tape i believe and i could be wrong the sensor needs to ground for it to work. http://i35.photobucket.com/albums/d182/Professor-Quest123/Turbos/P1010727.jpg http://i35.photobucket.com/albums/d182/Professor-Quest123/Turbos/P1010724.jpg Link to comment Share on other sites More sharing options...
2conquest Posted November 3, 2015 Author Report Share Posted November 3, 2015 Thank you for all the info. Im going to try and get it done this weekend hopefully and thank you for the pictures to go along with it! Link to comment Share on other sites More sharing options...
ucw458 Posted November 3, 2015 Report Share Posted November 3, 2015 oil pressure sender pic DO NOT use teflon tape i believe and i could be wrong the sensor needs to ground for it to work. Yes it needs a good ground to work. Link to comment Share on other sites More sharing options...
Recommended Posts