boostinmini Posted October 30, 2015 Report Share Posted October 30, 2015 Looking at td06 turbo wondering if I got the Starion exhaust housing machined would it fit? Or td06 center sections are just to big? Link to comment Share on other sites More sharing options...
scott87star Posted October 30, 2015 Report Share Posted October 30, 2015 06SL2 wheel fits, I'm running one. Link to comment Share on other sites More sharing options...
boostinmini Posted October 30, 2015 Author Report Share Posted October 30, 2015 It's a whole td06 turbo, not just the wheel, it will all fit once machined? Link to comment Share on other sites More sharing options...
creakyjoints Posted October 30, 2015 Report Share Posted October 30, 2015 Yes. Had a Sy/Ty 17c td06 on mine for awhile. Link to comment Share on other sites More sharing options...
importwarrior Posted October 30, 2015 Report Share Posted October 30, 2015 With machining the TD06 20G fits. Link to comment Share on other sites More sharing options...
boostinmini Posted October 30, 2015 Author Report Share Posted October 30, 2015 I find this awesome but hard to believe. So I can buy a full td06, machine my td05 and slide the td06 in and the band clamp and everything fits? Link to comment Share on other sites More sharing options...
boostinmini Posted October 31, 2015 Author Report Share Posted October 31, 2015 Also it's a td06h if that makes a difference? Link to comment Share on other sites More sharing options...
StarquestRescue Posted October 31, 2015 Report Share Posted October 31, 2015 I find this awesome but hard to believe. So I can buy a full td06, machine my td05 and slide the td06 in and the band clamp and everything fits?Yes, i would recommend the waste gate ported to minimize boost creep Also it's a td06h if that makes a difference?Yes it makes a difference. The td06h is bigger yet. The shop i have dealt with advised against it do to the nozzle area being compromised as well as the remaining thickness of the metal. But it has been done with no apparent issues. Link to comment Share on other sites More sharing options...
importwarrior Posted October 31, 2015 Report Share Posted October 31, 2015 TD06 20G (not 6H) in SlyDogs Red 86.The owner did get the larger compressor housing. Ported wastegate also.Love the power and fast delivery of boost. Link to comment Share on other sites More sharing options...
boostinmini Posted October 31, 2015 Author Report Share Posted October 31, 2015 Ok, this is good to know, s do the spool of the td06 is not too bad compared to a td05? Link to comment Share on other sites More sharing options...
importwarrior Posted October 31, 2015 Report Share Posted October 31, 2015 When I stomp the gas at 15 Psi it spins the tires in first or second at 30 mphThat's with a 2.5 inch exhaust no cat 3 inch muffler. Wlk17223 muffler from summit racing. 15 PSi 255/50/16 tires Link to comment Share on other sites More sharing options...
creakyjoints Posted October 31, 2015 Report Share Posted October 31, 2015 The center section for td05 and td06 based turbo's use the same center section. Well at least the water oil cooled ones. Have not used any oil only. Link to comment Share on other sites More sharing options...
boostinmini Posted November 1, 2015 Author Report Share Posted November 1, 2015 Ok here is another question, can compressor housing swap between td05 and td06 bearing sections? Link to comment Share on other sites More sharing options...
Skullzaflare Posted November 1, 2015 Report Share Posted November 1, 2015 Ok here is another question, can compressor housing swap between td05 and td06 bearing sections?it will fit, but will need to be sleeved for a 20g wheel. Link to comment Share on other sites More sharing options...
boostinmini Posted November 1, 2015 Author Report Share Posted November 1, 2015 So the back plate sizes are the same where the c clip hold it on? Link to comment Share on other sites More sharing options...
creakyjoints Posted November 2, 2015 Report Share Posted November 2, 2015 Yes. The center section are the EXACT same. Link to comment Share on other sites More sharing options...
creakyjoints Posted November 2, 2015 Report Share Posted November 2, 2015 (edited) Just make sure that the steel pin in the compressor is removed or lines up with the cut out for it in the center section. Edited November 2, 2015 by creakyjoints Link to comment Share on other sites More sharing options...
creakyjoints Posted November 3, 2015 Report Share Posted November 3, 2015 Forgot to mention it would also need to be machined for different size compressor wheel. Link to comment Share on other sites More sharing options...
boostinmini Posted November 8, 2015 Author Report Share Posted November 8, 2015 Ok guys thanks for the help, I found a sweet deal on a brand new mhi 19c and td06 compressor housing so should make a decent turbo for the price Link to comment Share on other sites More sharing options...
Recommended Posts