movin on Posted September 3, 2015 Report Share Posted September 3, 2015 (edited) I have an M28 head that needs a valve job due to a slight seat warp on two seats for the intake valves. This head was looked at by a machinist and I have his contact information and the receipt from him if you would like to talk to him. The seats are marked in the photos. I am not sure of the exact flatness of the head. I knew when I brought it in before he cleaned it, it was .006" right by the #3 cylinder. He said it cleaned up well and that it is more flat after being cleaned. I would recommend it being decked if you planned on running a metal gasket, because it doesn't look like glass. The good:Schneider 100lb springsPorted Runners with stock valves (porting was approved by machinist and was done by Scotty)Hydraulic set-up with stock cam (Jet Valve arms were grinded off for reduced weight)This head was able to help produce 290hp/320tq on a screamin banshee cam/16g/TBII need to check the ARP headstuds, but if they are fine (which they should be) I will throw those in too $150 shipped I feel this is reasonable because a bare casting of this head is $265 plus shipping. http://s12.postimg.org/4umgnn9zt/20150829_172724.jpg http://s12.postimg.org/tqfwb4wnt/20150829_172837.jpg http://s12.postimg.org/v47j6fvx5/20150829_172846.jpg http://s12.postimg.org/jhnf5b8m1/20150829_172904.jpg Edited September 28, 2015 by movin on Quote Link to comment Share on other sites More sharing options...
movin on Posted September 27, 2015 Author Report Share Posted September 27, 2015 Price lowered Quote Link to comment Share on other sites More sharing options...
movin on Posted September 28, 2015 Author Report Share Posted September 28, 2015 Sold Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.