03CL55AMG Posted July 16, 2015 Report Share Posted July 16, 2015 I am wiring some connectors and was curious as to where one would get the proper pins for the connector....this is a round connector, thanks. Link to comment Share on other sites More sharing options...
apate Posted July 16, 2015 Report Share Posted July 16, 2015 Can you post a picture of the connectors? you can check these sites.http://www.Digikey.comhttp://www.alliedelec.comhttp://www.mouser.comhttp://www.newark.com Link to comment Share on other sites More sharing options...
03CL55AMG Posted July 16, 2015 Author Report Share Posted July 16, 2015 Sure, it most likely be tomorrow. Link to comment Share on other sites More sharing options...
03CL55AMG Posted July 22, 2015 Author Report Share Posted July 22, 2015 Here is what the connectors look like Link to comment Share on other sites More sharing options...
psu_Crash Posted July 31, 2015 Report Share Posted July 31, 2015 Not a very good pic, but there should be numbers on the connector. Look that up and sites like those listed above will list the pins needed for it. Re-pinning a connector is a great way to go. Just make sure you have the right tools for the job. That can get very expensive, very quickly. I source this kind of thing in my job on a regular basis. Feel free to PM me and I'll help where I can. Link to comment Share on other sites More sharing options...
Recommended Posts