Jump to content

Hall Effect 4G54 Distributors, perfect for MPI swaps.


ZacMan
 Share

Recommended Posts

Was at the local pick-a-part yesterday scavenging some seats for my Ute, and happened across a couple of Magna wagons with injected 4g54's. Unfortunately the intake manifolds are the long-runner style, that don't fit the LHD StarQuests, so I didn't bother grabbing them. However, the distributors are totally usable for your triggering. These output the common Mitsy 4-1 pattern, and should be usable on almost any aftermarket ECU, and allow you to run an individual coil per plug (or wasted spark) and sequential injection.

 

I've seen a couple of people use the SOHC 4g63 optical distributors with a spacer made up, and that's a good way to go. These will give you the same result, however they're a direct fit, no spacers or any other malarkey needed.

 

If I was fitting one, I'd machine off the rotor post, and spin up a nice aluminium cap to seal them off. Would look very neat and tidy.

 

Sorry for not cleaning them... We've just bought a new house, and my parts washer isn't set up yet :-(. Both units spin nicely, with no noise or signs of wear from the bearings. Both motors I pulled these from were super gunky though, thus the mess.

 

I'm after $200NZD each, including shipping anywhere in the USA. I've seen people trying to get three times this much for SOHC 4g63 optical distributors with the spacer, and while they never will because that's an obscene price to ask, I think $200NZD is pretty fair for these :-).

 

Swing me a PM if you're interested.

 

http://i750.photobucket.com/albums/xx141/ProZac83/Stuff%20For%20Sale/IMG_20150326_121234_zps2yzcqu5v.jpg

 

http://i750.photobucket.com/albums/xx141/ProZac83/Stuff%20For%20Sale/IMG_20150326_121226_zpsxzu0jie5.jpg

 

http://i750.photobucket.com/albums/xx141/ProZac83/Stuff%20For%20Sale/IMG_20150326_121314_zpskup07rqt.jpg

Link to comment
Share on other sites

Good Stuff ZacMan!

Just for reference here is what I made for a "cap" on my CAS. I polished it all up real nice after this but I don't seem to have a pic.

http://imageshack.com/a/img546/7563/20110329090917.jpg

Edited by psu_Crash
Link to comment
Share on other sites

Both dizzies have now sold. I'll keep any eye out for more though, as they are a great solution to a triggering system on an MPI swap :-).

 

Cheers.

 

Zac.

Link to comment
Share on other sites

  • 3 weeks later...

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...