ZacMan Posted March 25, 2015 Report Share Posted March 25, 2015 Was at the local pick-a-part yesterday scavenging some seats for my Ute, and happened across a couple of Magna wagons with injected 4g54's. Unfortunately the intake manifolds are the long-runner style, that don't fit the LHD StarQuests, so I didn't bother grabbing them. However, the distributors are totally usable for your triggering. These output the common Mitsy 4-1 pattern, and should be usable on almost any aftermarket ECU, and allow you to run an individual coil per plug (or wasted spark) and sequential injection. I've seen a couple of people use the SOHC 4g63 optical distributors with a spacer made up, and that's a good way to go. These will give you the same result, however they're a direct fit, no spacers or any other malarkey needed. If I was fitting one, I'd machine off the rotor post, and spin up a nice aluminium cap to seal them off. Would look very neat and tidy. Sorry for not cleaning them... We've just bought a new house, and my parts washer isn't set up yet :-(. Both units spin nicely, with no noise or signs of wear from the bearings. Both motors I pulled these from were super gunky though, thus the mess. I'm after $200NZD each, including shipping anywhere in the USA. I've seen people trying to get three times this much for SOHC 4g63 optical distributors with the spacer, and while they never will because that's an obscene price to ask, I think $200NZD is pretty fair for these :-). Swing me a PM if you're interested. http://i750.photobucket.com/albums/xx141/ProZac83/Stuff%20For%20Sale/IMG_20150326_121234_zps2yzcqu5v.jpg http://i750.photobucket.com/albums/xx141/ProZac83/Stuff%20For%20Sale/IMG_20150326_121226_zpsxzu0jie5.jpg http://i750.photobucket.com/albums/xx141/ProZac83/Stuff%20For%20Sale/IMG_20150326_121314_zpskup07rqt.jpg Quote Link to comment Share on other sites More sharing options...
JohnnyWadd Posted March 25, 2015 Report Share Posted March 25, 2015 I will take one Quote Link to comment Share on other sites More sharing options...
ZacMan Posted March 25, 2015 Author Report Share Posted March 25, 2015 PM me Jeff, and we'll sort it out :-). Quote Link to comment Share on other sites More sharing options...
psu_Crash Posted March 26, 2015 Report Share Posted March 26, 2015 (edited) Good Stuff ZacMan!Just for reference here is what I made for a "cap" on my CAS. I polished it all up real nice after this but I don't seem to have a pic.http://imageshack.com/a/img546/7563/20110329090917.jpg Edited March 26, 2015 by psu_Crash Quote Link to comment Share on other sites More sharing options...
JohnnyWadd Posted March 28, 2015 Report Share Posted March 28, 2015 Paid Quote Link to comment Share on other sites More sharing options...
randy Posted March 28, 2015 Report Share Posted March 28, 2015 interested in one of them as well. Quote Link to comment Share on other sites More sharing options...
ZacMan Posted March 28, 2015 Author Report Share Posted March 28, 2015 Both dizzies have now sold. I'll keep any eye out for more though, as they are a great solution to a triggering system on an MPI swap :-). Cheers. Zac. Quote Link to comment Share on other sites More sharing options...
importwarrior Posted March 29, 2015 Report Share Posted March 29, 2015 Keep me posted please! Quote Link to comment Share on other sites More sharing options...
JohnnyWadd Posted March 30, 2015 Report Share Posted March 30, 2015 (edited) Keep me posted please! Edited April 4, 2015 by JohnnyWadd Quote Link to comment Share on other sites More sharing options...
JohnnyWadd Posted April 17, 2015 Report Share Posted April 17, 2015 Shipped yet? Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.