Dcrasta Posted June 15, 2010 Author Report Share Posted June 15, 2010 H3r3tec> Yes, the MECH is for the manual adjusted valves, the HYD is for the stock hyd valvetrain. Recommend the schnieder springs with them. Quote Link to comment Share on other sites More sharing options...
h3r3tic Posted June 15, 2010 Report Share Posted June 15, 2010 how much gain over stock cam? Im really interested. Any idle difference or redline difference? Quote Link to comment Share on other sites More sharing options...
fodder Posted June 17, 2010 Report Share Posted June 17, 2010 pmed block, pistons,crank if still on the table. Quote Link to comment Share on other sites More sharing options...
starquest7 Posted June 17, 2010 Report Share Posted June 17, 2010 pmed turbo. Quote Link to comment Share on other sites More sharing options...
Dcrasta Posted June 17, 2010 Author Report Share Posted June 17, 2010 PM's replyed The PDX cam was ok. Seemd to move the powerband higher, and had more charge, but I switched back to the stock cam. The Stock quest hyd cam is a good performer, if you add better springs and remove the exhaust restrictions. The springs in these cars are really bad, and tend to lose their tension fast. Get some schneider springs before you decide to upgrade the cam, and your valve float will go away. I was redlining my car to 6k and above with the stock cam and was making good power. Also, an adjustable cam gear is important if you really want to dial in your valve trane . Shawn Silva used to make them, however my old gear went away with my old long block (sniff.. sniff..). So to recap- Upgrade SpringsObtain Adjustable Cam GearNew Timing components (Chain etc..)Degree/dial in cam...Profit Quote Link to comment Share on other sites More sharing options...
Phillip_411 Posted June 17, 2010 Report Share Posted June 17, 2010 I am interested in the magna intake and injectors with fuel rail. Please send me a PM with info. (That is if nobody comes through on payment that asked before me.) Thanks,Phillip_411 Quote Link to comment Share on other sites More sharing options...
Dcrasta Posted June 18, 2010 Author Report Share Posted June 18, 2010 20G sale Pending. Quote Link to comment Share on other sites More sharing options...
Phillip_411 Posted June 19, 2010 Report Share Posted June 19, 2010 Payment sent for MPI setup. Please PM tracking info for shipping. Thanks,Shane Sanders Quote Link to comment Share on other sites More sharing options...
Dcrasta Posted June 20, 2010 Author Report Share Posted June 20, 2010 Magna sold to Phillip : Phillip you are really going to love this Magna. Block/pistons/crank pending sale Turbo Pending sale {e-check has to clear) Still have a New cylinder head available. Thanks everyone for you interest. Quote Link to comment Share on other sites More sharing options...
StarquestRescue Posted June 20, 2010 Report Share Posted June 20, 2010 Still have a New cylinder head available. Thanks everyone for you interest.What valves are in the head? NA or turbo valves? Quote Link to comment Share on other sites More sharing options...
Phillip_411 Posted June 21, 2010 Report Share Posted June 21, 2010 I cant wait. One more piece of the puzzel solved. Now I need injectors, Computer, and entire hot side. I plan on using one of the treadstone exhaust manifolds. If anyone has good deals on any these parts I'm all ears. Thanks,Phillip_411 Quote Link to comment Share on other sites More sharing options...
conquest27 Posted June 21, 2010 Report Share Posted June 21, 2010 pm sent...thnx Quote Link to comment Share on other sites More sharing options...
Dcrasta Posted June 22, 2010 Author Report Share Posted June 22, 2010 What valves are in the head? NA or turbo valves? NA valves. It is brand new with a mechanical valveset. It was to be the basis of a performance build, however I have not put any tools to it. Quote Link to comment Share on other sites More sharing options...
Dcrasta Posted June 22, 2010 Author Report Share Posted June 22, 2010 Guys, sorry if I'm not responding fast enough. I check the forum twice a day or so. Quote Link to comment Share on other sites More sharing options...
Phillip_411 Posted June 22, 2010 Report Share Posted June 22, 2010 Just got a call from Dcrasta explaining postage issue.Product being shipped fedex with tracking number. Thanks for going out of your way to get this shipped. I enjoyed talking to you.My apologies for posting your personal info. I realized what I did after the copy and paste.Post Deleted. Awating like a kid at Christmas for the intake Which should only take 2 days via fedex Quote Link to comment Share on other sites More sharing options...
conquest27 Posted June 22, 2010 Report Share Posted June 22, 2010 sent pm thnx Quote Link to comment Share on other sites More sharing options...
Phillip_411 Posted June 24, 2010 Report Share Posted June 24, 2010 I received my intake. It was packaged great. Thanks again for the swift order. Phillip_411 Quote Link to comment Share on other sites More sharing options...
Dcrasta Posted June 25, 2010 Author Report Share Posted June 25, 2010 Enjoy. Quote Link to comment Share on other sites More sharing options...
Frenchi934 Posted July 10, 2010 Report Share Posted July 10, 2010 pm'd Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.