Jay633 Posted December 21, 2009 Report Share Posted December 21, 2009 im trying to install an aftermarket stero, last time i did this i blew my panel were the speedometer and boost gauge are etc.. i also blew the running lights. pics on the wiring would help alot. please and thanks 88 mits starion wide body 1984-89 Mitsubishi Starion Stereo WiringConstant 12V+ Red/Black Switched 12V+ Blue Ground n/a Illumination Black/Yellow Dimmer n/a Antenna Trigger White/Black Antenna Right Front Front Speakers 4" DoorsLeft Front (+) White/Blue Left Front (-) Black/Blue Right Front (+) White/Red Right Front (-) Black/Red Rear Speakers 5 1/4" Side PanelsLeft Rear (+) Yellow/Blue Left Rear (-) Gray/Blue Right Rear (+) Yellow/Red Right Rear (-) Gray/Red i dont understand this. Link to comment Share on other sites More sharing options...
SpEeD147 Posted January 1, 2010 Report Share Posted January 1, 2010 this might help: http://speed147.com/conquest/88stereo.png Link to comment Share on other sites More sharing options...
ucw458 Posted January 4, 2010 Report Share Posted January 4, 2010 DON'T CUT THE FACTORY WIRE HARNESS. go get yourself a radio install kit for a 1st gen eclipse. The plugs for that radio are the same and make wiring the radio easy. All the wires will be labeled and correspond to aftermarket wiring colors. 1 Link to comment Share on other sites More sharing options...
Walker Posted April 25, 2013 Report Share Posted April 25, 2013 tag for reference Link to comment Share on other sites More sharing options...
Fresh802 Posted November 19, 2013 Report Share Posted November 19, 2013 I also blew my spedo and boost gauge light,. how does one go about fixing this? Link to comment Share on other sites More sharing options...
jjohnson Posted November 19, 2013 Report Share Posted November 19, 2013 Saved Link to comment Share on other sites More sharing options...
Recommended Posts