387 replies to this topic

[brianpaul98]

Well everyone I have switched over to selling Lucas injectors. Since Delphi was bought out by GM the are just about impossible to get. The new sizes are a 750cc primary and a 1000cc secondary and they are still a direct bolt in replacement. There are no modifications necessary to the mixer housing or fuel rail.


The price as of 3-14-13 will be $186.00 shipped.



PLEASE BE AWARE THAT THESE INJECTORS CANNOT BE PAIRED WITH THE FACTORY STOCK MITSUBISHI FUEL INJECTORS. THE INJECTOR'S ARE ABOUT A 1/4" TALLER SO THE UPPER FUEL RAIL WILL NOT MOUNT UP PROPERLY.


The sizes that I have available are 550cc, 750cc, 850cc, 950cc, 1000cc, 1050cc, 1150cc, 1225cc, 1400cc, 1600cc and 1680cc.

Size  ----------- Cost

550cc ----------- $70.00 ea. (Lucas)
750cc ----------- $85.00 ea. (Lucas)
850cc ----------- $85.00 ea. (Lucas)
950cc ----------- $90.00 ea. (Lucas)
1000cc ---------- $90.00 ea. (Lucas)
1050cc ---------- $90.00 ea. (Delphi) ( PM For Availability )
1150cc ---------- $95.00 ea. (Delphi) ( PM For Availability )
1225cc ---------- $100.00 ea. (Lucas)
1400cc ---------- PM for current pricing (Bosch)
1600cc ---------- PM for current pricing (Bosch)
1680cc ---------- $115.00 ea. (Lucas)


I ALSO CARRY THE 2200cc BOSCH INJECTORS "Aka : ID2000" -  $185.00 ea.



ALL INJECTORS COME WITH A 3 YEAR MANUFACTURER REPLACEMENT WARRANTY


Anyone interested speak now or forever be looking for used injectors...  


WHEN YOU ARE READY TO PURCHASE THE INJECTOR KIT PLEASE SEND ME YOUR PAYPAL E-MAIL ADDRESS AND I WILL SEND YOU AN INVOICE



UPDATE : If your actual shipping address is not the same as your Paypal address please have it updated before sending payment. I WILL NOT SHIP TO AN UNCONFIRMED ADDRESS OR ANY ADDRESS OTHER THAN WHAT IS LISTED ON THE PAYPAL PAYMENT INVOICE.


If you don't have a Paypal account USPS money orders ONLY are also accepted.


Here are some pictures for you to see them installed in my fuel rail and mixer housing.












I'VE DECIDED TO SWEETEN THE DEAL A LITTLE MORE SO I HAVE ADDED TO THE GP THESE SUPER SEXY STAINLESS STEEL BUTTON HEAD ALLEN BOLTS FOR THE UPPER FUEL RAIL, PULSATION DAMPER AND THE FUEL LINE.









PLEASE REMEMBER TO LEAVE FEEDBACK WHEN YOU GET YOUR INJECTORS INSTALLED


MY FEEDBACK LINK


=====================================================================================================


Hello Everyone, I want to take this time to give a little update on the injectors. This GP has gone very well and the majority of people who bought injectors from me are extremely happy with them.

Now, on the other hand there are some people who bought injectors from me and haven't had such good results. They were claiming the injectors were leaking, they didn't work, the car wouldn't idle, the car ran rough and wouldn't boost... just to name a few. After the injectors get sent back to me I send them back to my supplier to get tested and I found that every injector was filled with crud from a dirty fuel system, a dirty fuel system that most likely damaged the injectors that were in the car initially. I'm sorry to have to say this but

BRAND NEW INJECTORS FILLED WITH CRAP IS NOT CONSIDERED PART OF THE THREE YEAR WARRANTY

Below you can see a brand new set of injectors I got back from someone claiming that "they don't work". They were so clogged up one barely dribbled and the other one was more like a squirt gun.












With that said I want to make this very clear, if you buy a set of new injectors and you do not take the time to at least change the fuel filter, flush out the fuel feed line after the filter and flush out the upper fuel rail and I find that the injectors got clogged up with crap YOU WILL NOT just get a new set. You will either be paying to get them cleaned which I do not do at my shop, they are sent back to my supplier for that and I get charged for it or you will be paying for a new set if they cannot be cleaned / repaired. I have had several sets already that were damaged beyond cleaning and I was good enough to replace them but its happened too many times and my supplier can't keep handing out new injectors because someone didn't bother taking the necessary steps to get their fuel system into shape before installing them.

I do understand there are rare instances when an injector IS just bad whether it be a bad coil or something internal just wasn't right BUT the injectors I sell are put through a full spectrum of tests before I get them and I further leak test, OHM test and spray test them before I ship them out. So when someone emails me right after they get the injectors and says, HEY these don't work or says they leak I get this really strange look on my face because there is no way they can work here in my shop but after traveling in the mail to their house now they aren't working. Logic suggests that something happened AFTER they reached their destination and when I get them back the truth will be known.

Ok, thats all for now and if anyone needs a set please let me know.

Take care
Brian

Edited by brianpaul98, 30 July 2014 - 06:02 PM.

[on3 racing]

interested

[spoolinturbo]

ditto

[on3 racing]

id be interested in the stock replacements.

[89PalermoSHP]

if $150 for both, count  me in.

stock replacement that is...

Edited by 89PalermoSHP, 20 October 2009 - 03:19 AM.

[DryBear]

Interested in stock replacements

[newquest86]

will spacers and longer bolts be included ?

Edited by newquest86, 19 October 2009 - 02:21 PM.

[dstar88]

Id be interested in 2 1050's. or maybe a 1050 and an 1150.

what would the price be.



Daniel

[brianpaul98]

 89PalermoSHP, on 19 October 2009 - 01:49 PM, said:

if $150 for both, count  me in.

Yes its $150 for both injectors w/ stainless allen bolts and spacers included. You just pay the $4.95 Priority Mail shipping and the 4% PP fee.

Edited by brianpaul98, 19 October 2009 - 05:55 PM.

[brianpaul98]

 dstar88, on 19 October 2009 - 03:01 PM, said:

Id be interested in 2 1050's. or maybe a 1050 and an 1150.

what would the price be.

Daniel

Two 1050's would be $165.00 and a 1050 and an 1150 would be $185.00.

[brianpaul98]

 newquest86, on 19 October 2009 - 02:20 PM, said:

will spacers and longer bolts be included ?

Spacers and stainless allen bolts are included...

[aust75]

Im in for stock replacements!!

[brianpaul98]

Ok, it sounds like we have quite a bit of interest so I'm going to start a list in the first post and put everyones name in there with the size injectors you want. After I get 10 people lined up and payments sent in I'll get this GP going.

[Lunacy]

Can you do a set of 4 780cc injectors suitable for MPI?

[brianpaul98]

 Lunacy, on 19 October 2009 - 06:59 PM, said:

Can you do a set of 4 780cc injectors suitable for MPI?

Sure I can get you however many you want but I'll have to check on that size. Most of what I can get is like 650cc, 750cc, 850cc, 950cc etc... I'll check and get back with you as soon as I get an answer. I would also need to know what intake your using to be sure I get you the correct size injector.

Edited by brianpaul98, 19 October 2009 - 08:15 PM.

[D_Venable]

I'd be down for stock replacements

Derek

[brianpaul98]

 Lunacy, on 19 October 2009 - 06:59 PM, said:

Can you do a set of 4 780cc injectors suitable for MPI?

I just got your answer, I can get the 780cc injectors and they would be $265.00 plus 4.95 shipping and the 4% PP fee.

[spoolinturbo]

ide like to run a one up upgrade, which would be the 750, 1050. those direct fit too or would i need to modify mixer?
i dont think i would have too many problems on a nearly stock engine, but plan on changing to a t3 setup pretty soon. and AFPR so i should have zero probs.

cant wait =D

[Technology]

how much for four 1850's for mpi?

[Lunacy]

 brianpaul98, on 19 October 2009 - 10:05 PM, said:

I just got your answer, I can get the 780cc injectors and they would be $265.00 plus 4.95 shipping and the 4% PP fee.

Cheers for that, will pass at this stage. Thanks anyway