Jump to content

LED tails, INSTALLED


D_Venable
 Share

Recommended Posts

they are installed, finally.

 

added an extra pin to each of the tail light plugs...

 

Before

http://www.26liter.us/gallery/albums/userpics/10030/DSCF5995.jpg

 

After

http://www.26liter.us/gallery/albums/userpics/10030/DSCF5996.jpg

 

 

Spliced into the 3rd brake light for the separate signal for brakes

http://www.26liter.us/gallery/albums/userpics/10030/DSCF6000.jpg

 

 

Cut the wires you need to cut to get the brake light signal out of the turns signals (got the brake out of turn signal signal, but the brake signal is getting in to the turns through my board layout in the tail lights)

 

This is on the right hand gauge cluster switch, with the hazard and fog light switches

http://www.26liter.us/gallery/albums/userpics/15101/P8040065.jpg

 

 

and here are some pics, they're all of the "parking" lights only (except for one with the reverse light lit too)

http://www.26liter.us/gallery/albums/userpics/10030/DSCF6011.jpg

http://www.26liter.us/gallery/albums/userpics/10030/DSCF6013.jpg

http://www.26liter.us/gallery/albums/userpics/10030/DSCF6018.jpg

http://www.26liter.us/gallery/albums/userpics/10030/DSCF6027.jpg

http://www.26liter.us/gallery/albums/userpics/10030/DSCF6030.jpg

http://www.26liter.us/gallery/albums/userpics/10030/DSCF6023.jpg

Edited by D_Venable
Link to comment
Share on other sites

  • 3 years later...
if you are still offering to do these for $1500 i may be interested but i have a few questions about moisture protection and what if any protection the circuitry has.... feel free to PM me and thanks D_ven
Link to comment
Share on other sites

if you are still offering to do these for $1500 i may be interested but i have a few questions about moisture protection and what if any protection the circuitry has.... feel free to PM me and thanks D_ven

 

 

keep your eyes open on the GP section, Motocam is supposedly working on these now.

 

BC_99

Link to comment
Share on other sites

if you are still offering to do these for $1500 i may be interested but i have a few questions about moisture protection and what if any protection the circuitry has.... feel free to PM me and thanks D_ven

 

I'm not intersted making any. I gave price to shoo away all the cheapskates on this site (myself included) Honestly, it would take well over $2k to even have me considering.

 

As for moisture protection, I sprayed the boards after I populated them with a clear lacquer.

Link to comment
Share on other sites

  • 2 months later...
  • 1 month later...

bump for some editing and reference for someone

 

the reason the amber sections still light up when I hit the brake is from my board layout inside the tail lights. I believe a ground issue, so some diodes need to be installed. I'll have to look into that after I get her running

Edited by D_Venable
Link to comment
Share on other sites

 Share

×
×
  • Create New...