[Kellydahman]

After a very long wait I am happy to announce the arrival of a New 2nd Gen 3" Exhaust system.
569rwhp DOCUMENTED....

http://videos.street...1AF786A2293.htm

3" mandrel Bent
Aluminized
02 Bung welded on
Hangers welded on

Includes:
3" DP/ 3" Test Pipe/ 3" Rear (2) piece slip section

Increase your Horse Power output by 13-18 with the best Upgrade to your Starion/Conquest. Turbo Spool will increase Dramatically. Will increase your BOOST without adjustment 2-3 lbs.

This exhaust system was recently DYNO tested up to 569 RWHP. I am currently making a 4" exhaust for higher numbers.. When 3 ain't enough
call KDM for an Upgrade...

This system is from the Turbo to where you mount your Muffler.
New 3" DP Laser cut flange seals Perfect every time.
Redesigned to fit tighter under your car.
Relocated DP flange as to not rub underneath passanger floorboard.

Catalytic Converter shown in pictures not included.
Can be purchased seperately for $150 as shown ready to bolt up with flanges installed


Test Pipe designed for Direct Catalytic converter Replacement. I can sell you the Exhaust with the test pipe for off road use and Sell you a Cat with the flanges welded on to it to replace the Test Pipe for Use on Public Roads and Highways. Switch them at your convience

For Prices please email me@www.kdmperformance@gmail.comOr visit my website @www.kdmperformance.com

lower 48states Ground UPS


DISCLAIMER:::These are not street legal.
This Exhaust advertised herin is for closed course racing or off street use only.
Please obey your local state laws .Products are for off-road or show purposes only. Some of them may not be suitable for regular driving conditions and do not carry a DOT, SAE or C.A.R.B approval. The end-user must follow the direction given and any misuse of these products is at their own risk. We are not to be held responsible for any misuse of these products.


Please contact me@ www.kdmperformance@gmail.com
Paypal accepted @ kellydahman@yahoo.com


Thanks Kelly















[/color][color=red]

[Casey_L]

...
Test Pipe designed for Direct Catalytic converter Replacement. I can sell you the Exhaust with the test pipe for off road use and Sell you a Cat with the flanges welded on to it to replace the Test Pipe for Use on Public Roads and Highways. Switch them at your convience :wink:...

Ohhh I really like that. I might be in the market for one of these very soon then!

[Banky]

It would be cool to offer those of us who have the first gen exhaust some kind of deal to have ours modded to fit tighter as they hang way too low.

[Highly Boosted]

It might just be to late for me Kelly my budd rob just had to get the flex section and 2 45bends to make mine for me should be done on wed. But give me a week and I'll get the rad hoses,ALT,TB shaft seals from you. Cant wat to see the pics tho Matt

[Kellydahman]

The 1st gen and 2nd exhausts are completely different designs. The parts are none interchangeable from one to the other.
The costs of redoing the exhaust will be added to the New 2nd gen exhaust.
The price of the 2nd Gen will be $325 and $45 Packaging/shipping very soon. Get yours before that happens..
Thanks

[jr_ss]

Banky, if you have a welder and the access to a shop it's easy to modify. I cut the DP to test pipe flange completely off and welded those 2 pieces together. That is the only problematic area of Kelly's first design. He changed that on the second gen and that is impart the cause of it sitting higher up under the car. Granted I can raise mine another 1in or so under the car which I will be doing here shortly, as I'm getting ready for my coilovers to go on...

[Casey_L]

Any new updates on this? How about some pics...

[jr_ss]

What updates do you need? It's just an advertisement saying he has them available...

[Casey_L]

I just wanted to see some pictures of it and see what it looks like compared to the 1st gen system.

[Kellydahman]

I have yet to take pics due to camera not available. I now have the camera and will have pics up asap with the 2nd gen installed with the cat and the test pipe, Also the exhaust system off the car. Tomorrow....
Thanks

[Rocketman1000R]

Count me in I PayPaled you $342. What happened to the stainless idea? I'll see you soon at the West coast club meet.

Brent

[Kellydahman]

Got it, Exhaust going out today and Pic's up as well.
Thanks

[Highly Boosted]

hay kelly my buddy is dickn around on the stanless exhaust I should have the money by friday. Thanks Matt

[DanMitsu]

Hey Kelly,. give me length on your staright section to where it bolts up to your downpipe. I had to have mune re-welded for turbo. So they put a 3 bolt on the end of the dowpipe. For the staright section.

Just let me know where you measured it from,. so i can compare. And how much,. for NO downpipe, and i have the muffler section just no the bend from teh DP under the chunk to the muffler. Did you ever get that bracket for the Alt done? High amp one on your board? Sorry for the 50million q's.

Thanks
Dan

[Kellydahman]

Hey Kelly,. give me length on your staright section to where it bolts up to your downpipe. I had to have mune re-welded for turbo. So they put a 3 bolt on the end of the dowpipe. For the staright section.

Just let me know where you measured it from,. so i can compare. And how much,. for NO downpipe, and i have the muffler section just no the bend from teh DP under the chunk to the muffler. Did you ever get that bracket for the Alt done? High amp one on your board? Sorry for the 50million q's.

Thanks
Dan

PM sent

[Kellydahman]

Pic's Up.
It's been raining here in SoCal for the last 2 days. I just went ahead and snapped some quick pictures. I have been driving around with this for a week now with no bottoming out or rattling.
Rocketman also drove in the car twice. Hope you like the new system as it is the only one available I sell.
Thanks

[mitsustarion]

The 1G exhaust can tuck up just as high as the 2g with a little work. I just recently took mine down to my buddies muffler shop to weld on my new Apex-i N1 muffler, and we got that exhaust stirdy and strong!! with out haveing to mod the hangers at all. it helps in hangeing the muffler so the fit is tight and snug! I have no problems at all with scrapeing, rubbing, or ratteling.

Keep up the good work KDM!! thanks again for makeing a great aftermarket exhaust!

[jszucs]

Wow that looks realy nice. I was realy worred about scraping as the last one look as it would hang lower but I will def be in on one of these faily soon. Maybe I'll luck out and someone will buy me one for x-mas

[Kellydahman]

Thanks...
Let me know when your ready for one..

[SFBMX88]

How long will these be available for this price?