Jody1 Posted April 11, 2013 Report Share Posted April 11, 2013 So I am running the FIP Hurricane with the 2 controllers. One for fuel and the second for ignition. The ignition controller has an opening page with the FIP preset constants. Does anyone have this? I plan on changing to the one box controller but would like to get the car running in the immediate term. Link to comment Share on other sites More sharing options...
NotStock88 Posted April 11, 2013 Report Share Posted April 11, 2013 I don't know anybody who still runs ign n fuel Separate. Spend the money and send it to Scott usually it's less than a week turn around time well worth in my opinion. Link to comment Share on other sites More sharing options...
wrngwae Posted April 11, 2013 Report Share Posted April 11, 2013 ^^^^^X2 thats what i did and it comes loaded with MS and Scott will tune you in...fo free....... lol Link to comment Share on other sites More sharing options...
Jody1 Posted April 11, 2013 Author Report Share Posted April 11, 2013 I agree. Scott is very knowledgeable, and helpful. Attempting to get this running to quickly diagnose any other shortcomings before introducing new variables. But, I am probably just making it harder. Have no fear, if there is a secret way to make this harder, I will discover it. LOL Link to comment Share on other sites More sharing options...
scott87star Posted April 11, 2013 Report Share Posted April 11, 2013 http://picturehosting.com/images/oblique9881/igpro.jpg Lol, there you are. Note that what FIP calls Static timing is the trigger angle in megasquirtville and its a much better description. For the dizzy's I lock I start with 68 degrees and can usually get the timing correct just by moving the dizzy a bit. Link to comment Share on other sites More sharing options...
Recommended Posts