movin on Posted March 9, 2012 Report Share Posted March 9, 2012 I was wondering where the two gaskets go on the drive plate that are laying on it and what do the bolts looks like and their specs that hold it in? I looked in the FSM and I could not find anything besides one pic of the bolts holding the flex plate to the torque converter. The original flex plate is on the motor I sold my friend, so I don't have any reference at the moment for the parts. Link to comment Share on other sites More sharing options...
Ironside Posted March 9, 2012 Report Share Posted March 9, 2012 First off you need the bushing that goes in the back of the crank.Second each spacer goes on oppsites sides of the flex plate.And last, If you put the flex plate against the tourqe converter it will fit flush only one way.Good luck finding the bolts, I had to cut 5 speed bolts to make them work. Link to comment Share on other sites More sharing options...
movin on Posted March 9, 2012 Author Report Share Posted March 9, 2012 All my parts I need are about 30 miles away. I will definitely have to make the drive up there soon. Thanks Link to comment Share on other sites More sharing options...
Indiana Posted March 9, 2012 Report Share Posted March 9, 2012 http://www.b2600turbo.com/flexplate.htm Link to comment Share on other sites More sharing options...
Recommended Posts