Wide or Narrow block
Posted 02 November 2020 - 01:23 PM
Posted 02 November 2020 - 01:35 PM
The 2.6L Starion engine is a wide block pattern. The engine code is a 4G54
The 4G63 came in the Starion in Japan, Europe, Australia. It was a 2.0L and had a 6 bolt pattern for the flywheel. Also a wide block (they used the same transmission)
The 4G63 was later revised in the 90s where the block to bell housing pattern was narrower thus the term narrow block. This revision to the engine also saw a change with the flywheel bolt pattern become 7 bolts instead of 6.
There are also 4G64 (2.4L) wideblocks out there. Usually found in old Mitsubishi trucks such as the mighty max. These also use a 6 bolt flywheel pattern and can be swapped into the quest. A 4G63 head CAN bolt onto a 4G64 block.
A 4G63 head will not bolt onto the 2.6L starion block. They are complete different engines. There were a FEW like 3 DOHC heads that were made for the 2.6L engine but they are prototypes and never messed produced. No way youd ever find one and if you did where are you gonna get parts for that.
Edited by Turbo Cary, 02 November 2020 - 01:37 PM.
Posted 03 November 2020 - 08:01 AM
There is a ton a great info on here that will really help your understanding. You'd also need to track down a 1G Eclipse/Talon wiring harness to make that happen. There are several around who have done this swap. Its very viable and parts for the 4G6X are much more available.
1988 Conquest TSi ...
1987 Conquest Flatty ...
1987 Conquest TSi ...
1999 Eclipse 4G63 ... heavily modified.
Feeback Thread | Motor rebuild thread | Restoration thread
Posted 16 November 2020 - 06:42 PM
all wide blocks (2.4 or 2.0) came in a 2 wheel drive AUTO ONLY trucks.
D50, Mighty MAX
B-71 87 TSI ~ RIP
Black 87 Starion ~ Mess SOLD!!!
Proud New 89 slightly Rusted Fiji Owner !!!
0 user(s) are reading this topic
0 members, 0 guests, 0 anonymous users