Jump to content

1988 Mitsubishi Starion Feeler


Starheel
 Share

Recommended Posts

OK, bought a house now need to furnish it.

 

I have a 1988 Starion auto

88K miles

rebuilt 10K ago by previous owner

only 2 spots of rust, see pics

needs paint and sunroof perimeter

alpine radio with 10" sub

slotted disc brakes

adjustable coilovers

no a/c, has rough looking a/c compressor but no belt. heat works great.

ran great until 4K RPM where it sputtered. I started taking it down to find the problem and never got it all the way back together.

while i was searching for the problem i got the injectors tested, said they were fine, new fuel filter and cleaned in tank and in line cone filter, changed oil to mobile one, changed trans fluid and filter, new distributor, new plug wires, i upgraded the throttle body with lower shores machined throttle body, added a fuel pressure gauge on the fuel rail, egr delete, cruise delete, opened up the air filter housing, upgraded the tps, and added a boost gauge in the factory location.

Got everything together and stripped one bolt keeping the throttle body on the intake also noticed that one of the injectors doesn't hold the pressure, but fuel pressure while turning over is right on.

 

So to get it running with the installed accessories would take re-tapping the intake, refilling the coolant, and re-connecting the vacuum tubing including the boost gauge.

 

extra parts:

couple extra untested injectors

tail lights, small barely visible crack

lower shores brand new head with OE size valves and valve job, 100# springs and 1.6 roller rockers

extra cam shaft, stock

extra computer

2.5" hard OVCP with BOV and turbo to intercooler pipe

3" turbo back exhaust with magna flow muffler, and crack around flange at turbo

extra 3" down pipe that doesn't match with the turbo back system

16g turbo with port matched and stress relieved manifold

AEM A/F ratio gauge

3" GM MAF and MAF translator

extra fuel rail

two intake manifolds, one bead blasted with new sensors in it

o an m manuals

MITSU OEM tester no plugs

 

I know im forgetting some stuff, but i will update. have title in hand. I would like to sell as a package at $3500obo

I have access to a trailer and could deliver within 3 hours of Chapel Hill, NC

http://i982.photobucket.com/albums/ae309/mjomorgan/3901A100-E352-4861-9BBB-5D2477BB41E0.jpg

Edited by Starheel
Link to comment
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
×
  • Create New...